@Article{, title={Enhancement the sensitivity of humidity sensor based on an agarose infiltration reflection-type photonic crystal fiber interferometer تحسين أداء الحساسية لمتحسس الرطوبة المستند على مقياس تداخل الليف الفوتوني البلوري ذو نمط الانعكاس}, author={Hassan F. Hassan حسن فالح حسن and Hanan J. Taher حنان جعفر طاهر and Saif Akeel سيف عقيل}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={15}, number={35}, pages={83-91}, year={2017}, abstract={Photonic Crystal Fiber Interferometers (PCFIs) are widely used for sensing applications. This work presents the fabrication and study the characterization of a relative humidity sensor based on a polymer-infiltrated photonic crystal fiber that operates in a Mach- Zehnder Interferometer (MZI) reflection mode. The fabrication of the sensor only involves splicing and cleaving Photonic Crystal Fiber (PCF) with Single Mode Fiber (SMF). A stub of (LMA-10) PCF spliced to SMF (Corning-28). In the splice regions. The PCFI sensor operation based on the adsorption and desorption of water vapour at the silica-air interface within the PCF. The sensor shows a high sensitivity to RH variations from (27% RH - 95% RH), with a change in its reflected power and the position of the interference peaks is found to be shifted that the interference pattern with a 100 nm span can be observed with high humidity sensitivity of (8.49 pm / %RH) is achieved with compact (4mm) PCF length . The sensor has the advantages for suitable for monitoring humidity in microenvironments. The repeatability, long-term stability, measurement accuracy. Wide humidity range. The response time of the sensor is found to be 1.4 sec for a change in RH of 50 %RH. The fast response time suggests that the sensor can potentially be used as a human breath rate monitor in a clinical situation.

مقياس التداخل للألياف البلورية الفوتونية تستعمل بشكل واسع في تطبيقات التحسس. وفي هذا العمل تم توصيف وتصنيع متحسس الرطوبة النسبية بالاعتماد على مقياس التداخل لماخ زيندر المحقون ببوليمر والذي يعمل في نمط الانعكاس. تم تصنيع هذا المتحسس ببساطة بواسطة لحام ليف مقياس التداخل لليف الفوتوني البلوري (LMA-10) مع ليف ذو نمط مفرد (SMF-28). يتم عمل المتحسس بالاعتماد على امتزاز بخار الماء عند حاجز سيليكا- ھواء مع الليف البصري البلوري الفوتوني. المتحسس ابدى حساسية عالية لمقدار التغير بالرطوبة (27%- 95%) و زحزحة لموقع قمم التداخل نحو الاطوال الموجية الطويلة مع زيادة في قيم الرطوبة النسبية وقد حصل على اعلى مقدار للحساسية (8.49) بيكو متر/النسبة المئوية للرطوبة النسبية عند طول (4)مليمتر. متحسس الرطوبة المصمم له عدة مزايا حجمه صغير، مستقر، ذو قياسات دقيقية، متحسس لمدى واسع من الرطوبة، زمن الاستجابة سريع (1.4) ثانية يمكنه من الاستعمال في جهاز التنفس للمريض في العيادات الطبية.} }