TY - JOUR ID - TI - Study affecting factors on the recovery of some heavy metal ions from aqueous solutions using natural clay دراسة العوامل المؤثرة على قابلية استرجاع بعض المعادن الثقيلة من المحاليل المائية باستخدام الأطيان الطبيعية AU - Ahmed S. Yahya أحمد صبحي يحيى PY - 2016 VL - 10 IS - 3 SP - 76 EP - 82 JO - Journal of university of Anbar for Pure science مجلة جامعة الانبار للعلوم الصرفة SN - 19918941 27066703 AB - This study includes the ability of selected clays, which are (Iraqi bentonite, Iraqi Kaolin and Italian Kaolin) for the adsorption of heavy metals (Cu+2, Zn+2, Cd+2 and Pb+2) from aqueous solution. As preliminary experiment, the extraction operation of these ions were carried out by using batch method at (pH= 6.7 and 30 ̊C) for 10 min as a contact time to indicate the best type of these clays for removing these ions. Different temperatures (30 ̊C, 40 ̊C, 50 ̊C) and times (10 min, 20 min, 30 min) were also carried out at various pH (4 , 6.7 and 9) to select the optimum conditions for removing these ions. Flame atomic absorption spectrophotometer was used to determine the concentration of these ions. The obtained results showed that the ability of the studied clays to removal these ions at (pH=6.7, 30 ̊C and 10 min contact time) were as follows: Iraqi bentonite> Iraqi Kaolin>Italian Kaolin The results were also showed that the percent adsorption for removal the most ions at (pH = 9, 30 ̊C and 10 min contact time) was 100%. The increase of reaction temperature and contact time led to increase the adsorption percent. The adsorption percent for all these ions was half or less than half when the solution of these ions containing foreign ions.

تتناول هذه الدراسةقابلية اطيان مختارة هي ( البنتونايت العراقي ، الكاؤلين العراقي والكاؤلين الايطالي )لامتزازايونات المعادن الثقيلة (Cu+2, Zn+2, Cd+2, Pb+2) من المحاليل المائية.حيث اجريت عمليات الاستخلاص للايوناتبطريقة مزج المحاليل دفعة واحدة بالظروف(10 min, pH = 6.7, 30 ̊C)لبيان افضل هذه الاطيان المستخدمة في ازالة الايونات المدروسة. كما استخدمت درجات حرارة مختلفة (50 ̊C, 40 ̊C, 30 ̊C )وازمان امتزاز مختلفة ( 30 min, 20 min, 10 min) لكل من هذه الاوساط الحامضية( pH = 9, 6.7,4 ) لتحديد الشروط المثلى لازالة هذه الايونات. استخدم جهاز الامتصاص الذري اللهبي لتقدير هذه الايونات. اوضحت النتائج ان قابلية هذه الاطيان لازالةالايونات في درجة حرارة (30 ̊C) و زمن امتزاز (10 min) و دالة حامضية (pH = 6.7) تتبع الترتيب التالي.البنتونايت العراقي >الكاؤلين العراقي >الكاؤلين الايطالي. اوضحت النتائج ان الظروف المثلى لازالة ايونات المعادن الثقيلة بالبنتونايت تكون باستخدام (pH = 9) حيث وصلت النسبة المئوية للامتزاز الى % 100لاغلب الايونات في ظروف (30 C˚, 10 min). وان لزيادة درجة حرارة الوسط وكذلك زيادة زمن الامتزاز تأثير واضح على ارتفاع النسبة المئوية للامتزاز.انخفضت النسب المئوية للامتزاز لجميع الايونات الى النصف او اقل عندما يكون الايون المدروس في محلول يحتوي ايونات اخرى. ER -