TY - JOUR ID - TI - Pitting Corrosion Behavior of 304 SS and 316 SS Alloys in Aqueous Chloride and Bromide Solutions سلوك التأكل النقري لسبائك الفولاذ المقاوم للصدأ 304 و316 في محاليل الكلور والبروم الملحية AU - Ibtehal Kareem Shakir ابتهال كريم شاكر AU - Abdul-Kareem Mohammed Ali Alsamurraee عبد الكريم محمد علي السامرائي AU - Shaymaa Mahdi Saleh شيماء مهدي صالح PY - 2018 VL - 24 IS - 1 SP - 53 EP - 69 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The importance of the present work falls on the pitting corrosion behavior investigation of 304 SS and 316 SS alloys in 3.5 wt% of aqueous solution bearing with chloride and bromide anion at different solutions temperature range starting from (20-50)oC due to the pitting corrosion tremendous effect on the economic, safety and materials loss due to leakage. The impact of solution temperatures on the pitting corrosion resistance at 3.5wt% (NaCl and NaBr) solutions for the 304 SS and 316 SS has been investigated utilizing the cyclic polarization techniques at the potential range -400 to1000 mV vs. SCE at 40 mV/sec scan rate followed by the surface characterization employing Scanning Electron Microscope. The results show that a significant decline in the pitting corrosion potential Ep values of both stainless steel alloys in chloride and bromide solution during temperature increase attributed to the pitting corrosion potential decreased arises from the modification of the passive film properties. The surface examination using optical microscope and scanning electron microscope prove the occurring of higher pitting density over 304 SS in chloride solution than that observed in bromide solution with a non-circular lacy cover pitfall out at the center and falls inside the pits hall in comparison to the isolated circular lacy cover pit formed on 316 SS in 3.5wt% NaBr solution at 50 oC.

يقع الاهتمام الكبير في هذا البحث على دراسة سلوك التأكل النقري لسبائك الفولاذ المقاوم للصداء 304 و316في3.5 نسبة مئوية وزنية لمحاليل مائية محملة بأيونات الكلور والبروم السالبة عند درجات حرا ره مختلفة تبدأ من 20 الى 50 درجه مئوية بسبب التأثير الهائل للتأكل النقري على الاقتصاد والسلامة وفقدان المواد الحاصل بسبب التسرب. قد تم دراسة تأثير درجة حرارة المحلول على مقاومة التأكل النقري لمحلول 3.5 نسبة مئوية وزنية لمحلول كلوريد الصوديوم وبروميد الصوديوم لسبائك الفولاذ 304 و316 باستخدام تقنينة الاستقطاب الحلقي عند معدل جهد يبدأ من -400 ملي فولت الى 1000 ملي فولت متبوعا بدراسة خواص السطح بأستخدام المجهرالالكتروني . لقد اظهرت النتائج ان انخفاض واضح في قيم جهد التأكل النقري للسبائك في محاليل الكلور والبروم بارتفاع درجة حرارة المحلول يعود السبب الى انخفاض مقاومة طبقة الحماية . فحوصات السطوح اثبتت حدوث تأكل نقري عالي الكثافة على سبيكة الفولاذ 304 في محلول كلوريد الصوديوم اعلى منه في محلول بروميد الصوديوم وان نقر كبيرة الحجم ذات غطاء شريطي متساقط من منتصف الغطاء الى داخل قعر الفجوة قد لوحظت مع سبيكة فولاذ 316 في محلول 3.5 %الكلوريد مقارنة بفجوات معزولة دائرية الشكل في محلول 3.5 % بروميد الصوديوم عند درجة حرارة 50 درجة مئوية. ER -