TY - JOUR ID - TI - SURFACE LAYERS CHARACTERISTICS OF THREE DIFFERENT STEEL ALLOYS HARDENED BY ND: YAG LASER خواص الطبقات السطحية لثلاث انواع مختلفة من سبائك الفولاذ المصلدة بالليزر نيديميوم – ياك AU - Khansaa Dawood Salman Asifa Mahdi Mohammed Enas Mozahim Abed خنساء داود سلمان عاصفة مهدي محمد ايناس مزاحم عبد PY - 2017 VL - 17 IS - 4 SP - 614 EP - 624 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - Laser surface treatment is an effective way to improve the characteristics of surface layers for the most alloys. In the present work, three different steel alloys: low carbon steel A3115, medium carbon steel 1045 and high carbon steel 52100 were hardened by Nd: YAG laser at 1.064nm wave length with 1000mj energy. An experiments with Nd: YAG laser were carried out to study the effect of laser hardening process on the microstructure, roughness, microhardness during laser hardening of the three alloys. All of surface layers characteristics were analyses using optical microscope. Laser surface treatment enhanced the characteristics of surface layers for all the alloys. Also Nd: YAG laser surface treatment produced plate martensite for 52100 alloy more than A3115 and 1045 alloys. From the results is obtained finer martensite, an excellentroughness and larger microhardness for this alloy. The aim of present investigation study the effect of Nd: YAG laser hardening on the characteristics of surface layers for three different steel alloys (A3115, 1045, 52100) .

تعتبر المعاملة السطحية بالليزر من الطرق الفعالة في تحسين خواص الطبقات السطحية لأغلب السبائك . في البحث الحالي تم تصليد ثلاث انواع مختلفة من سبائك الفولاذ: فولاذ منخفض الكاربون ,A3115 فولاذ متوسط الكاربون 1045 والفولاذ العالي الكاربون 52100 بالليزر نيديميوم– ياك ذو الطول الموجي 1.064nm وبطاقة .1000mj اجريت تجارب باستخدام الليزر نيديميوم – ياك لدراسة تأثير عملية التصليد بالليزر على البنية المجهرية, الخشونة, الصلادة الدقيقة اثناء التصليد بالليزر للسبائك الثلاثة . تم دراسة معظم خواص الأسطح للسبائك باستخدام المجهر الضوئي . اظهرت المعاملة السطحية بالليزر الى زيادة خواص الطبقات السطحية ولجميع السبائك, كذلك أدت المعاملة السطحية بالليزر إلى تكوين مارتنسايت رقائقي للسبيكة52100 اكثر نعومة مما هو عليه للسبيكتين .1045,A3115 من النتائج تم الحصول على أفضل خشونة وأعلى صلادة دقيقة لنفس السبيكة . الهدف من البحث الحالي هو دراسة تأثير التصليد بالليزر نيديميوم – ياك على خواص الطبقات السطحية لثلاث سبائك مختلفة من الفولاذ ( .( 52100, 1045, A3115. ER -