TY - JOUR ID - TI - STUDY ON Al2O3 COATING DEPOSITED ON 2024 Al ALLOYS BY MICRO ARC OXIDATION (MAO) USING TiO2 NANO ADDITIVES. دراسة طلاء الالومينا Al2O3 المرسبة على الالمنيوم 2024بواسطة الاكسدة المايكروية باستخدام مضافات ثاني اوكسيد التيتانيوم TiO2 AU - Samir Hamid Awad Noor Fadil Sultan سمير حامد عواد نور فاضل سلطان PY - 2017 VL - 17 IS - 4 SP - 669 EP - 685 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - In this work, the effect of adding natural additives such as rice husks ash and nano additives such as TiO2 to the electrolyte on the properties of ceramic oxide coating formed on 2024 Al alloy substrate by micro arc oxidation (MAO). Results proved that the formation of hard ceramic oxide coatings were values(313 to 531.3)HV. Roughness increased with deposition time increasing, thickness of coatings variation with deposition time. Morphology of coated sample for 45min with electrolyte compositions(10g/l KH2PO4, 5g/l NaCO3, 4g/l H3PO4, 6g/l (NH3)2MO7O24,3g/l RHA, and 9g/l KOH, 1g/l nanoTiO2)showed the dense structure and uniform pores distribution, increasing the addition of TiO2to 3g/lthe results showed that more porous structure. Wear resistance of coatings improved by means of decreasing loss weight from (0.0017g of substrate) to (0.0003-0.0009)of samples at (15min and 60min) respectively, with composition(1g/l nanoTiO2, 10g/l KH2PO4, 5g/l NaCO3, 4g/l H3PO4,6g/l (NH3)2MO7O24,3g/l RHA, and 9g/l KOH) .

تم في هذا البحث دراسة تأثير أضافة المواد الطبيعيه مثل قشور الرز المحروقه ودقائق TiO2النانويه الى المحلول الالكتروليتي على مواصفات الطلاء المرسب على قواعد سبائك الالمنيوم 2024Alبطريقة الأكسدة المايكرويه (.(MAOاثبتت النتائج تكوين طلاء سيراميكي يمتاز بصلاده عاليه (313 to 531.3)HV أن خشونة الطلاء تزداد بزيادة زمن الترسيب بينما سمك الطلاء يتغير مع الوقت .البنيه المجهرية للعينات المطليه بزمن ترسيب 45 دقيقه تتميز ببنيه كثيفه و بوجد مسامات مايكرويه منتظمة التوزيع عند استخدام محلول يتألف من(5g/l NaCO3, 10g/l KH2PO4, 4g/l H3PO4,6g/l (NH3)2MO7O24, 3g/l RHA, 9g/l KOH, and 1g/l nanoTiO2) بينما عند استخدام نفس محلول مع زيادة الدقائق TiO2النانويه الى 3 g/lفأن بنية الطلاء تتميز بوجود مسامات بنسبه أعلى .زيادة مقاومة بلى بشكل ملحوظ عند أستخدام (g/l (1وبزمن ترسيب 15 و 60 دقيقه حيث وجد انخفاض كبير في الوزن المفقود عند مقارنة النتائج مع الماده الاساس من0.0017.g الىg(0.00030-0.0009) وهذا يعود الى الصلاده العاليه للطلاء السيراميكيز ER -