@Article{, title={Synchronous Buck Converter with Perturb and Observe Maximum Power Point Tracking Implemented on a Low-Cost Arduino-microcontroller المحول التزامني الخافض مع تقنية التتبع والاضطراب لنقطة الطاقة العظمى تنفذ على متحكمة الاردوينو واطئة الكلفة}, author={Emad Talib Hashim عماد طالب هاشم and Sarah Adil Mohammed Hussien سارة عادل محمد حسين}, journal={Journal of Engineering مجلة الهندسة}, volume={24}, number={2}, pages={16-33}, year={2018}, abstract={Maximum power point tracking (MPPT) is used in photovoltaic (PV) systems to enhance efficiency and maximize the output power of PV module, regardless the variation of temperature, irradiation, and the electrical characteristics of the load. A new MPPT system has been presented in this research, consisting of a synchronous DC-DC step-down Buck converter controlled by an Arduino microcontroller based unit. The MPPT process with Perturb and Observe method is performed with a DC-DC converter circuit to overcome the problem of voltage mismatch between the PV modules and the loads. The proposing system has high efficiency, lower cost and can be easily modified to handle more energy sources. The test results indicate that the use of the proposed MPPT control with the designed synchronous Buck converter increases the PV output power; hence increases the overall solar system efficiency. The synchronous Buck converter test results used in this design showed high converter efficiency up to 95% of the power produced from the solar module, leading to reduce power loss caused by the power transfer process from PV module to the loads.

تقنية تتبع نقطة الطاقة العظمى تستخدم في النظام الفوتوفولتائي لكي تزيد من القدرة المستخرجة من اللوح الفوتوفولتائي بغض النظر عن تأثير درجة الحرارة وحالة الاشعاع الشمسي وخصائص الحمل الكهربائية. طور نظام جديد بتقنية تتبع نقطة الطاقة العظمى في اللوح الفوتوفولتائي يتكون من المحول التزامني الخافض للتيار الكهربائي المستمر والذي يتحكم به وحدات المتحكمة الصغيرة الاردوينو.ان تقنية تتبع نقطة الطاقة العظمى مع طريقة الاضطراب والتتبع قد طبقت مع دائرة المحول التزامني الخافض للتيار المستمر للتغلب على مشكلة عدم توافق الفولتية بين اللوح الفوتوفولتائي والحمل. النظام الناتج لديه كفاءة عالية, كلفة واطئة وممكن بسهولة تحويله لكي يتحمل مصادر فولتية او طاقة اعلى. النتائج العمليه بينت ان استخدام النظام المقترح يتحكم بتقنية تتبع نقطة الطاقة العظمى يزيد من كفاءة الطاقة المستخرجة من اللوح الفوتوفولتائي وبالتالي يزيد من كفاءة النظام الشمسي الكلية. ان نتائج اختبار المحول التزامني الخافض للتيار المستمر المستخدم في هذا التصميم اظهرت كفاءة تحويل عالية للطاقة الماخوذة من اللوح الفوتوفولتائي بنسبة اعلى من 95% وبالتالي قلل من خسائر الطاقه الناتجة من تحويل القدرة من اللوح الفوتوفولتائي الى الحمل.} }