TY - JOUR ID - TI - Statistical analysis of the removal of Chromium(VI)by Iron Oxide Nanoparticle (Fe3O4) التحليل الإحصائي لإزالة كروم السداسي بواسطة مادة النانو المازة )أوكسيد الحديد) AU - Najwa Saber Majeed نجوى صابر مجيد AU - Duaa Mohammed Naji دعاء محمد ناجي PY - 2018 VL - 24 IS - 2 SP - 62 EP - 79 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Investigation of the adsorption of Chromium (VI) on Fe3O4 is carried out using batch scale experiments according to statistical design using a software program minitab17 (Box-Behnken design). Experiments were carried out as per Box-Behnken design with four input parameters such as pH (2-8), initial concentration (50–150mg/L), adsorbent dosage (0.05–0.3 g) and time of adsorption (10–60min). The better conditions were showed at pH: 2; contact time: 60 min; chromium concentration: 50 mg/L and magnetite dosage: 0.3 g for maximum Chromium (VI) removal of (98.95%) with an error of 1.08%. The three models (Freundlich, Langmuir, and Temkin) were fitted to experimental data, Langmuir isotherm has better described the adsorption process. Whereas, the kinetics results of the adsorption process obeyed the pseudo-second-order.

يتم التحقيق في امتزاز الكروم السداسي على أوكسيد الحديد(Fe3O4) بها باستخدام تجارب النمط الدفعي (batch experiment ) وفقا للتصميم الإحصائي باستخدام برنامج حاسوبي(Minitab17) (Box-Behnken design). اجريت التجارب وفقا للتصميم box-Behnken مع اربعة عوامل كمدخلات مثل درجة الحموضة (2-8) , تركيز الابتدائي (50-150 mg/l) ,جرعة المادة المازه (0.05-0.3 g) ,والوقت من الامتزاز ((10-60 min . وافيد ان الظروف المثلى لتكون 2 درجة الحموضة 0.3 g من المادة المازه مع جرعه 50 mg/l تركيز الابتدائي وزمن 1 hr، وكانت الإزالة في هذه الظروف 98.95% مع نسبة خطا قليلة .1.08% تم تحليل النتائج باستخدام موديلات(Freundlich, Langmuir and Temkin) , موديل لانكماير يمثل أفضل وصف لعملية الامتزاز . في حين تم دراسة حركية الامتزاز بالاعتماد على موديل الدرجة الثانية لأنها مثلت اعلى معامل ارتباط . ER -