TY - JOUR ID - TI - The Effect of Load Magnitude on Fatigue Life and Thermal Behavior of Notched Fatigue Specimen AU - Laith Hussain Al Najar AU - Luay Sadiq Al-Ansari AU - Mohammed Wahab Al-Jibory PY - 2018 VL - 26 IS - 1 SP - 306 EP - 314 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Fatigue failure is an important phenomenon that occurred in the mechanical and structural systems. Furthermore, the failure due to fatigue load causes losing in that system. So many researches studying the fatigue behavior and improving the design of mechanical and structural systems in order to increase the fatigue resistance of these systems. In this work, the effects of notch position and load magnitude on fatigue behavior were studied. In order to study the fatigue life of the test specimens due to make V- notched, the rotating cantilever beam samples were used. Also, the temperature distribution along testing specimens was monitoring of IR camera during the fatigue tests. Numerical model has been done by using ANSYS Workbench 15.0. The comparison between experimental and numerical results was made, also the hardness of the fractured surfaces was measured.The results show that, the fatigue life of the test specimens can be increased by making a notch in the appropriate position. Also, there is a similarity between experimental and numerical results. IR camera gave a good expectance to the fracture position from changing in temperature distribution along the test specimens. Finally, the area of sudden fracture of the fractured surfaces reduced directly with load magnitude and inversely with notch shifting away from edge region.

ظاهرة الكلل هي مهمة تحدث في النظم الميكانيكية والهيكلية. وعلاوة على ذلك, الفشل بسبب الحمل الكلل يسبب فشل النظام الميكانيكي. وقد أجريت العديد من الأبحاث لدراسة سلوك الكلل وتحسين تصميم النظم الميكانيكية والهيكلية من أجل زيادة مقاومة الكلل لهذه الانظمة. في هذا العمل، تم دراسة آثار موضع الحز ومقدار الحمل على سلوك الكلل. من أجل دراسة عمر الكلل لعينات الاختبار بجعل حز بشكل (V) اتستخدمت عينات الذراع الناتئ الدوار(ROTATING CANTILEVER BEAM). أيضا، توزيع درجة الحرارة على طول عينات الاختبار كانت مراقبة بواسطة كاميرا الأشعة تحت الحمراء خلال اختبارات الكلل. تم تنفيذ النموذج العددي باستخدام ((ANSYS WORKBENCH 15.0. أجريت المقارنة بين النتائج العملية والعددية، كما تم قياس صلادة الأسطح التي تعرضت للكسر.يمكن زيادة عمر الكلل لعينات الاختبار من خلال جعل الحز في الموقع المناسب. أيضا، هناك تشابه في السلوك بين النتائج العملية والعددية. أعطت كاميرا الأشعة تحت الحمراء توقعا جيدا لموقع كسر من تغيير في توزيع درجة الحرارة على طول عينات الاختبار. وأخيرا، مساحة منطقة الكسر المفاجئ في الأسطح المكسورة قلت طرديا مع مقدار الحمل وعكسيا مع تغيير موقع الشق بعيدا الى نهايه. ER -