TY - JOUR ID - TI - EXPERIMENTAL AND THEORETICAL STRESS ANALYSIS INVESTIGATION FOR COMPOSITE PLATE UNDER THERMAL LOAD دراسة تجريبي ونظرية لتحليل صفيحة مركبة تحت الحمل الحراري AU - Emad Q. Hussein عماد قاسم حسين AU - Sara J. Alasadi سارة الاسدي PY - 2018 VL - 9 IS - 1 SP - 205 EP - 221 JO - KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية SN - 20715528 25230018 AB - A paper focuses on the investigation of the stress-strain for E-glass fiber /polyester composite plates subjected to the uniform temperature at various factors, such as fiber volume fraction and fiber orientation. To study the stress analysis of composite plate two methods are used: The First method is an experimental test by applying a uniform temperature on the composite plate inside the furnace and a measure the deformation of the plate by using dial gage. The second method based on a finite element solution using ANSYS (ver. 15) program. The results presented here that, the maximum strain in longitudinal direction occurs at a ply angle (90º), whereas the minimum value at a ply angle (0º). However, the maximum strain in transverse direction occurs at a ply angle (0º) whereas the minimum value at a ply angle (90º). In general, the magnitude of thermal strain increases with increasing temperature difference (∆T) and decreases with increasing the fiber volume fraction (

تركز هذه المقالة على التحقيق في تحليل الإجهاد لوحة مركبة من للألياف الزجاجية(/ ( البوليستر معرضة E-GLASS لدرجة حرارة منظمة مع تغير في الحجم واتجاه الالياف .وقد تم استخدام طريقتين لدراسة تحليل الإجهاد لوحة المركبة : الطريقة الأولى هي اختبار تجريبي بواسطة تسليط عليها درجة حرارة موحدة على لوحة المركبة داخل الفرن وقياس التشوه .النتائج الواردة في هذه ANSYS اللوحة باستخدام دايل كيج .اما الطريقة الثانية هي حل العنصر المحدود باستخدام برنامج في حين ان اقل قيمة عندما تكون ،)º90( اعلى قيمة للانفعال في الاتجاه الطولي يحدث عندما تكون زواية الاياف ،المقالة )واقل قيمة º0( في حين أن اعلى قيمة للانفعال في الاتجاه العرضي يحدث عندما تكون زواية الاياف ،)º0( زواية الاياف Δ ( .)بشكل عام، فإن قيمة الانفعال الحراري تزداد مع زيادة تغير درجة حرارة º90( عندما تكون زواية الاياف )وتنخفض T ER -