@Article{, title={Effect of Substrate and Growth temperature on Zinc Oxide nanorods via Hydrothermal Processing تأثير القاعدة و درجة حرارة الانماء على قضبان اوكسيد الخارصين النانوي المحضرة بالطريقة الهيدروحرارية}, author={Husain Y. Mohammed حسين يعقوب محمد and Sattar J. Kasim ستار جبار قاسم}, journal={Journal of Kufa - physics مجلة الكوفة للفيزياء}, volume={9}, number={2}, pages={114-127}, year={2017}, abstract={In this paper, the hydrothermal processing (HTP) was employed to synthesize Zinc oxide nanorods (ZnO-NRs) arrays on p-type Si(100), and glass substrates at 95℃, and 120 ℃. The X-ray diffraction(XRD) measurements confirm that all prepared films are polycrystalline with hexagonal structure and orientation on plane c-axis (002) as shown in FESEM images. The intensity of peak (2ө =34.2°) was increased and its full width at half maximum (FWHM) decreased with the increase of temperature due to the increase in their particles size. The images of field emission scanning electron microscopy (FESEM) show that ZnO-NRs on Si substrate gives a better result from the glass substrate with an aspect ratio (17.95, and17.43) for the prepared samples at (120°C, and 95°C) , respectively. The growth temperature effect is clear onto average diameter, average length and aspect ratio, where they increased with increasing temperature. The optical measurement shows that the peak of absorption increased with increasing temperature while the reflection spectra decreased. The band gap of ZnO-NRs on Si was determined from the reflection spectra while for glass substrate was determined from absorption spectra.

في هذا البحث تم استخدام الطريقة الهيدروحرارية (HTP) لتحضير مصفوفات اوكسيد الخارصين النانوية (ZnO-NRs) على قواعد السليكون و الزجاج بدرجة حرارة ℃5 9و ℃120. بينت قياسات حيود الاشعة السينية (XRD) لكل الاغشية المحضرة ان اتجاه النمو المفضل لمركب اوكسيد الخارصين (ZnO) باتجاه المستوي (002) و المحور C و ان الاغشية المحظرة ذات شكل سداسي كذلك لوحظ ذلك من خلال صور المجهر الالكتروني الماسح لانبعاث المجال (FESEM). ان شدة قمة الزاوية (2ө =34.2°) تزداد بزيادة درجة حرارة الانماء و يقل عرض منتصفها عند قيمته العظمى (FWHM) بزيادة درجة حرارة الانماء بسبب الزيادة الحاصلة بحجمها الحبيبي. بينت فحوصات المجهر الالكتروني FESEM ان اغشية القضبان المحضرة على قاعدة السليكون افضل من قاعدة الزجاج اذ كانت نسبة طولها لقطرها حوالي (17.95,17.43) المحضرة بدرجة حرارة (120°,95°) بالترتيب , ان تأثير درجة الحرارة الانماء كان واضح على معدل القطر والطول و النسبة بينهما اذ زادت بزيادة درجة حرارة الانماء. بينت الفحوصات البصرية ان قمة الامتصاص تزداد بزيادة درجة الحرارة بينما نقصان طيف الانعكاسية بزيادة درجة حرارة الانماء. ان قيمة فجوة الطاقة للقضبان المرسبة على قاعدة السليكون تم حسابها بالاعتماد على طيف الانعكاسية و على قاعدة الزجاج من طيف الامتصاصية.} }