@Article{, title={Effect of Heat Treatment on The Hydroformability of CuZn 35 Sheet Metal}, author={Abdul Hakeem Amer S.Salim عبد الحكيم عامر سلمان and Ali H. Alhelli علي حسين محمد}, journal={Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية}, volume={20}, number={3}, pages={505-510}, year={2017}, abstract={Sheet metal forming becomes a research topic for its widely using in the industrial field, these researches seeking for a better specifications of the products with low cost of production processes using available raw materials. In this work the sheet metal used is CuZn35 1mm thick. This sheet metal formed by a process named hydroforming process using a square shaped die to form the sheet metal according to its cavity by the pressure of the hydraulic which must be in direct contact with the surface of the sheet metal. Tests had been made for this sheet metal and for the final product for the as received specimen and for the heat treated one which shows the improvement of the formability of this sheet metal.

يعتبر مجال بحوث تشكيل الصفائح المعدنيه من المجالات الواسعة و اصبحت محط أنظار الباحثين و مادة ثريه للبحوث العديدة لما لها من استخدامات واسعة من الصناعة و الحياه العمليه ،ان هذه البحوث تهدف للحصول على مواصفات أفضل و كلف انتاج اقل باستخدام خامات معدنيه متوفره في هذه الدراسه ان الصفيحة المستخدمه هي (سبيكة البراصCuZn35 ) بسمك ا مليمتر . تم تشكيل هذة الصفيحة بطريقة التشكيل الهيدروليك باستخدام قالب ذو مقطع مربع حيث تم سحب الصفيحة لتجويف القالب بواسطة ضغط الهيدوليك حيث يكون تلامس مباشر بين الهيدروليك و سطح الصفيحة . تم اجراء العديد من الفحوصات للصفيحة المعدنيه و للمنتوج الاخير للسبيكة المستلمه بدون مكعالجات حراريه و كذلك للسبيكة المعالجة حرارياً و التي أظهرت تحسناً و اضحاً لقابلية التشكيل .} }