TY - JOUR ID - TI - Investigation of the External Loads Applied on the PVC and PE Pressurized Pipes التحقيق في الأحمال الخارجية المسلطة على أنابيب البولي فينيل كلورايد والبولي ايثيلين المضغوط AU - Humam Mohammed Salih همام محمد صالح PY - 2017 VL - IS - 39 SP - 406 EP - 426 JO - Al-Rafidain University College For Sciences مجلة كلية الرافدين الجامعة للعلوم SN - 16816870 AB - The irrigation systems, water supply system, sewage water system ….etc. Dealing with many types of pipes and fittings depending on the applications. The current study was concert on test the polyethylene (PE) and polyvinyl chloride (PVC) pipes experimentally and theoretically under external loads and internal pressure to simulate the application conditions of pipes which are buried under ground used to transit the fluid under pressure such as drink water, sewage water or any other purpose and find out the deformation, stress and strain due to this loads. The tested was carried out for two size (actual and standard) of the two pipes (PE and PVC). The external load represented by a force in range (10-50KN), and the internal loads represented in pressure in range (5-20 bar). In the experiment a hydraulic press was used to supply the external load and hydraulic pump to supply the internal pressure with two adapter on the two end of tested pipe. The results showed that the deformation, stress and strain increase with increase in internal and external loads and the peak values of that were in the maximum internal and external loads (20 bar internal pressure and 50KN external force), also the experimental tests match the numerical calculation for both actual and standard size.

ركزت الدراسة الحالية على اختبار أنابيب البولي إثيلين (PE) والبولي فينيل كلورايد (PVC) عمليا ونظريا" تحت الأحمال الخارجية والضغوط الداخلية لمحاكاة ظروف تطبيق الأنابيب التي دفنت تحت الأرض المستخدمةلنقل السائل تحت الضغط مثل مياه الشرب، مياه الصرف الصحي أو لأي غرض آخر, ومعرفة التشوه، الاجهادواالانفعال بسبب هذه الأحمال. وأجريت الاختبار لحجمين (الحقيقي والقياسي) لنوعين من الأنابيب (PE وPVC). الحمل الخارجي ممثلة بقوة على مدى (10-50 كيلونيوتن)، والأحمال الداخلية ممثلة في الضغط على مدى (5-20 بار). الاختبار العملي كان باستخدام كابس يستخدم لتزويد الحمل الخارجي ومضخة هيدروليكية لتجهيز الضغط الداخلي مع اثنين من السدادات على نهايتي انبوب الاختبار. وأظهرت النتائج أن التشوه، الاجهاد والانفعال يزداد مع الزيادة في الأحمال الداخلية والخارجية و وبلغت القيم ذروتها عند أقصى حمل داخلي وخارجي (الضغط الداخلي 20 بار و القوة الخارجية 50كيلو نيوتن). وكان هنالك تقارب بين االاختبارات العملية والنظرية وكذلك بين الحجم الحقيقي والقياسي لنفس الانبوب ER -