TY - JOUR ID - TI - EFFECT OF LUBRICANTS CONTAINING DIFFERENT NANO-PARTICLES ON THE PERFORMANCE OF WORN JOURNAL BEARINGS تأثير الزيوت الحاوية على دقائق نانوية على تصحيح تأثير البلى في المساند المقعدية الاسطوانية AU - Basim A. Abass Nadhim F. Mohammed باسم عجيل عباس ناظم فاهم محمد PY - 2018 VL - 18 IS - 1 SP - 15 EP - 30 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - The present work deals with the isothermal analysis of worn journal bearing lubricated with Nano-lubricants. The bearing wear affect the oil film thickness and causes a decrease in load carrying capacity of the journal bearing. On the other hand, many works show that the addition of Nano- particles to the oil enhances its viscosity. The main goal of the present work is to investigate the ability of the Nano-lubricant to correct the wear effect on the performance of such bearings. The modified Reynolds equation was solved using finite difference technique to obtain the pressure distribution in the clearance gap of the worn journal bearing. Dufran's model was used to include the effect of wear on the thickness of the oil film. The effect of adding three different types of Nano-particles namely, Dimond, CuO and TiO2 to the base oil has been investigated. Bearing static characteristics in terms of load capacity, friction force, end leakage and power loss for different eccentricity ratios have been investigated. The mathematical model has been validated for the pressure results obtained in the present work with that obtained by other workers and the results found to be in a good agreement. The results obtained in the present work show that the load carrying capacity enhances by about40%, 9% and 3% for the bearing with wear depth parameter of 0.4, eccentricity ratio of 0.7 lubricated with oil containing TiO2, CuO and Dimond Nano-particles respectively in comparison with pure oil lubricated bearing.

تتضمن هذه الدراسة تحليلا للمساند المقعدية التي تعمل بزيوت حاوية على دقائق نانوية. من المعروف جيدا ان قابلية تحمل المساند المقعدية تقل بسبب بليان سطحه. من ناحية اخرى اثبتت دراسات متعددة ان اضافة مواد نانوية الى الزيت الاساس تساعد على رفع لزوجته. الهدف الرئيسي لهذا العمل هو مناقشة قابلية الدقائق النانوية المضافة على قابلية تصحيح تأثير البلى في المساند المقعدية الاسطوانية عن طريق دراسة تأثيرها على اداء تلك المساند. تم حل معادلة رينولدز المعدلة للاخذ بنظر الاعتبار تأثير البلى على شكله الهندسي باستخدام طريقة الفروقات المحددة وذلك للحصول على توزيع ضغط الزيت داخل فجوة المسند . تم استخدام النموذج المقترح عن طريق (Dufran)ة الخصائص السكونية للأخذ بنظر الاعتبار تأثير البلى على سمك طبقة الزيت. تم دراسة تاثير ثلاثة انواع من المواد النانوية وهي الالماس وثاني اوكسيد التيتانيوم واوكسيد النحاس. تم دراسة الخصائص السكونية للمسند بدلالة قابلية تحمله للحمل وقوة الاحتكاك والتسرب الجانبي للزيت وخسائر الطاقة عندما يعمل المسند في قيم مختلفة من نسب اللاتمركز. اوضحت النتائج المستحصلة في هذه الدراسة بان قابلية المسند المقعدي المتأكل قد زادت بنسب تراوحت 50% و23% و3% عند اضافة دقائق نانوية من ثاني اوكسيد التيتانيوم واوكسيد النحاس والالماس على التعاقب بالمقارنة مع تلك المستحصلة عند تزيت المسند بزيت لا يحتوي على دقائق نانوية ER -