@Article{, title={Nanosecond laser pulses for aluminum and copper drilling استخدام نبضات الليزر النانوية في تثقيب الالمنيوم والنحاس}, author={Sumaya Jeleel سمية جليل ابراهيم and Walid K. Hamoudi وليد خلف حمودي}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={16}, number={36}, pages={47-52}, year={2018}, abstract={Nd:YAG laser pulses of 9 nanosecond pulse duration and operating wavelength at 1.06 µm, were utilized to drill high thermal conductivity and high reflectivity aluminum and copper foils. The results showed a dependence of drilled holes characteristics on laser power density and the number of laser pulses used. Drilled depth of 74 ϻm was obtained in aluminum at 11.036×108 W/cm2 of laser power density. Due to its higher melting point, copper required higher laser power density and/or larger number of laser pulses to melt, and a maximum depth of 25 µm was reached at 13.46×108 W/cm2 using single laser pulse.

تم استخدام ليزر النيدميوم – ياك الذي يعمل بالطول الموجي 1.06 مايكرومتر والذي يعطي نبضات ليزرية بأمد 9 نانوثانية من أجل تثقيب رقائق الالمنيوم والنحاس ذي الانعكاسية والتوصيلية الحرارية العالية. أوضحت النتائج إعتماد خصائص الثقوب المنجزة على كثافة قدرة شعاع الليزر وعدد النبضات الليزرية. تم الحصول على عمق ثقب طوله 74 مايكرون في رقاقة الالمنيوم عند استخدام نبضة ليزر واحدة بقدرة ليزر (11.036×108) واط/سم٢. بسبب درجة الانصهار اللاعلى للنحاس فقد تم الحصول على عمق ثقب طوله 25 باستخدام نبضة ليزر واحدة بقدرة ليزر (13.46×108) واط/سم٢} }