TY - JOUR ID - TI - Energy and Exergy Analysis of Dual Channel Solar Air Collector with Different Absorber Plates Geometry التحليل الحراري وتحليل الطاقة المتاحة لمجمع شمسي مزدوج القناة يعمل بالهواء باستعمال وسط ماص للحرارة AU - Najim A. Jassim نجم عبد جاسم AU - Suhaib J. Shbailat صهيب جواد كاظم PY - 2018 VL - 24 IS - 4 SP - 19 EP - 40 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Flat-plate collector considers most common types of collectors, for ease of manufacturing and low price compared with other collectors. The main aim of the present work is to increase the efficiency of the collector, which can be achieved by improving the heat transfer and minimize heat loss experimentally. Five types of solar air collectors have been tested, which conventional channel with a smooth absorber plate (model I), dual channel with a smooth absorber plate (model II), dual channel with perforating “V” corrugated absorber plate (model III), dual channel with internal attached wire mesh (model Ⅳ), and dual channel with absorber sheet of transparent honeycomb, (model Ⅴ). The dual channel collector used for increasing heat transfer area and heat removal factor to improve thermal performance. The outdoor test was conducted during the period December (2016) to February (2017) at different mass flow rates 0.0217 kg/s, 0.0271 kg/s and 0.0325 kg/s. The experiments were carried out from 8:30 AM to 3:00 PM for clear days. Experimental results show that the average thermal efficiency was (72.2 %) for model (III), (40.2 %) for model (I), (51.6 %) for model (II), (65.1 %) for model (Ⅳ) and (59.7 %) for model (Ⅴ). At the last part of the study, the exergy analyses were derived for both collectors. The results of this part showed that the conventional channel model (I) is having largest irreversibility, and the dual channel collector model (III) is having a greatest exergetic efficiency.

يعتبر المجمع الشمسي المسطح اكثر ألانواع شيوعا ، لسهولة التصنيع والسعر المنخفض مقارنة مع المجمعات الشمسية ألاخرى. الهدف الرئيسي من هذا العمل هو زيادة كفاءة المجمع الشمسي، والتي يمكن تحقيقها من خلال تحسين نقل الحرارة وتقليل فقدان الحرارة تجريبيا. تم تصميم وبناء خمسة أنواع من أجهزة تجميع الهواء الشمسي وهي كالاتي قناة التقليدية مع لوحة امتصاص مسطحة (نموذج І)، قناة مزدوجة مع لوحة امتصاص مسطحة (نموذج Ⅱ)، قناة مزدوجة مع لوحة امتصاص مموجة "Ⅴ" ومثقبة (نموذج ⅡІ)، قناة مزدوجة مع لوحة امتصاص وشبكة معدنية (نموذج ⅤІ)، وقناة مزدوجة مع لوح امتصاص نافذ بشكل خلية نحل (نموذج Ⅴ). أجري الاختبار التجريبي خلال الفترة من ديسمبر (2016) إلى فبراير (2017). أجريت التجارب من الساعة 8:30 صباحا حتى الساعة 3:00 مساء لأيام صافية ولثلاث قيم مختلفه لمعدلات تدفق الهواء (0.0217, 0.0271, 0.0325). بينت النتائج التجريبية ان الكفاءة الحرارية (72.2 %) في النموذج (ⅡІ), (40.2 %) في النموذج (І), (51.6 %) في النموذج (ІІ), (65.1 %) في النموذج (ⅤІ), (59.7 %) في النموذج (Ⅴ).في الجزء الأخير من الدراسة، تم اجراء تحيليل الطاقة المتاحة للمجمعات الشمسية. وأظهرت النتائج أن نموذج القناة التقليدية يحظى بأكبر قدر من الخسائر اللاارجاعية، وأن نموذج القناة المزدوجة يتمتع بأكبر قدر من كفاءة الطاقة المتاحة. ER -