@Article{, title={Effect of Cutouts on the Behavior of Clamped Rectangular Plates تأثير الثقوب على سلوك الصفائح المستطيلة المقيدة}, author={Arz Yahya Rzayyig أرز يحيى رزيك}, journal={Anbar Journal of Engineering Sciences مجلة الأنبار للعلوم الهندسية}, volume={4}, number={1}, pages={45-59}, year={2011}, abstract={Plates with interior openings are often used in both modern and classical aerospace, mechanical and civil engineering. The understanding of the effects of two cutouts on the stress concentration factor, maximum stress and deflections in perforated clamped rectangular plates, were considered. Parameters such as location, size of cutout and the aspect ratio of plates are very important in designing of structures. These factors were presently studied and solved by finite element method (ANSYS) program. The results based on numerical solution were compared with the results obtained from different analytical solution methods. One of the main objectives of this study is to demonstrate the accuracy of the analytical solution for clamped square plate.
In general, the results of the square clamped plates with two cutouts come out in good agreement. The results presented here indicated that the maximum stress, deflection of perforated plates can be significantly changed by using proper cutouts locations and/or size. The results show that the rectangular plate containing two cutouts arranged along the width is stronger and stiffer than when arranged along the length at a given spacing, and the square plate is always stronger and stiffer than an equivalent rectangular plate for the same loading condition.

الصفائح ذات الثقوب الداخلية غالبا ما تستخدم حديثا وقديما في التطبيقات الهندسية المدنية والميكانيكية. ولفهم تأثير وجود الثقبين على معامل تركيز الإجهاد والإجهاد الأعظم والهطول في الصفائح المستطيلة والمقيدة تم إجراء هذا البحث. إن المتغيرات مثل موقع وحجم الثقب أو النسبة بين الطول إلى العرض للصفيحة من الضروري دراستها وذالك لأهميتها في تصميم الأجزاء. جميع هذه العوامل تمت دُراستها وحلها بطريقةِ العناصرِ المحدودةِ برنامج (ANSYS). إن النَتائِج التي تم التوصل إليها والمستندة على الحَلِّ العددي قد تم مقارنتهاَ بالنَتائِجِ التي تم الحَصولَ عليها مِنْ طرقِ الحَلِّ التحليليةِ المختلفةِ. من إحدى الأهدافِ الرئيسيةِ في هذه الدراسةِ أَنْ تَعْرضَ دقةَ الحَلِّ التحليليِ للصفائحِ المربّعة المقيدة.عُموماً، ثبّت إن نَتائِجَ الصفائح المربعة المقيدة ذات ثقبين متطابقة بدرجة جيدةِ. كذلك النَتائِج قدّمتْ هنا الإجهادَ الأقصى، الهطول في الصفائح المثقبة والتي يمكن أن تتغير بشكل ملحوظ بتغير المواقعِ و/ أَو الحجم. النَتائِجُ تبين إن الصفائح المستطيلةُ والتي َتحتوي على ثقبين على العرضِ أقوى وأصلبُ مِنْ عندما ترتّبتْ على الطولِ، والصفائح المربّعة أقوى وأصلبُ دائماً مِنْ الصفائح المستطيلة عند نفس شروط التحميل.} }