@Article{, title={Shear Behavior of Slender Ferro cement Box Beams تصرف القص للأعتاب الفيروسمنتية الصندوقية النحيفة}, author={Aqeel H. Chkheiwer and Mazin A. Al-Mazini and Mustafa Sh. Zewair}, journal={Muthanna Journal of Engineering and Technology(MJET) مجلة المثنى للهندسة والتكنولوجيا}, volume={4}, number={2}, pages={1-10}, year={2016}, abstract={This study investigated (experimentally and analytically) the influence of mortar compressive strength (37.4, 48.3 and 60.1 MPa) and the number of wire mish layer in web and bottom flange on the shear behavior of ferrocement slender box beams. To achieve these targets, 12 ferrocement box beams with shear span to effective depth ratio(a/d) of 2.8 (slender beams) are equipped, tested and assessed, all beams having cross section of 300*175 mm, length of 2000 mm and hollow core of 180*115 mm. The tested beams were divided into four groups, each group consists of three beams depending on compressive strength value, the first group was without wire mish, the second group was with one layer of wire mish in web and bottom flange, the third group was two layers of wire mish in web and one in bottom flange and the fourth group was with two layers of wire mish in web and bottom flange. As well as ANSYS-11 program was used to analyze these beams by nonlinear finite element method. Test results showed that, the first cracking and ultimate loads increases as the wire mish layers in web and bottom flange increases, the deflection of the tested beams decreases with increasing mortar compressive strength and wire mish layers in web and bottom flange, the finite element model gives good agreement with the experimental results within 9%.

تناولت الدراسة (عمليا وتحليليا) تاثيرمقاومة الانضغاط المختلفة( 37.4 و48.3 و60.1 نت/ملم2 ) للملاط الاسمنتي و عدد طبقات شبكة التسليح في لوح القص والشفه السفلى على سلوك القص للاعتاب الفيروسمنتية الصندوقية النحيفة. لتحقيق هذة الاهداف,تم اعداد وفحص 12 عتبة صندوقية من الفيروسمنت ذات نسبة فضاء القص إلى العمق الفعال 2.8 . حيث كانت كل الاعتاب ذات مقطع عرض بابعاد 300*175 ملم و قلب مجوف بابعاد مقدارها 180*115 ملم وطول 2000 ملم . قسمت العتبات المفحوصة إلى اربع مجاميع وكل مجموعة تتكون من ثلاث عتبات اعتمادا على قيم مقاومة الانضغاط للملاط الاسمنتي.المجموعة الاولى كانت خالية من شبكة التسليح اما المجموعة الثانية كانت تحتوي على طبقة واحدة في لوح القص والشفة السفلى, بينما المجموعة الثالثة احتوت على طبقتين في لوح القص وطبقة واحدة في الشفة السفلى و الرابعة احتوت على طبقتين في لوح القص والشفة السفلى.اضافة إلى ذلك تم استخدام طريقة العناصر المحددة (برنامج ANSYS-11) لتحليل العتبات المفحوصة. اظهرت النتائج ان حمل التشقق الاول والحمل الاقصى يزداد بزيادة عدد طبقات شبكة التسليح في لوح القص والشفة السفلى للعتبة. بينما تبين ان اود العتبات يقل بزيادة مقاومة الانضغاط وعدد طبقات شبكة التسليح في لوح القص والشفة السفلى.أعطت نتائج التحليل اللاخطي للعتبات بطريقة العناصر المحددة توافق جيد مع النتائج العملية في حدود 9%.} }