TY - JOUR ID - TI - Ductility and Toughness of Unsymmetrical CFRP Strengthening of Reinforced Concrete Beams المطيلية والمتانة للعتبات الخرسانية المسلحة والمقواة بألياف الكاربون البوليميرية الغير متناظرة AU - Abdulsalam M. Njeman عبد السلام محمد نجيمان AU - Akram S. Mahmoud اكرم شاكر محمود PY - 2018 VL - 12 IS - 1 SP - 10 EP - 25 JO - Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية SN - 19927428 2706686X AB - The use of externally bonded composite materials such as carbon fiber reinforced polymers (CFRP) sheets is a modern and convenient way for strengthening and repairing reinforced concrete (RC) beams. This study presents experimental investigations on the flexural behavior of reinforced concrete beams strengthened by unsymmetrical CFRP sheets with various configurations. Effects of number of which strengthened faces of strengthening and fiber direction on the flexural strength of RC beams are examined. Six RC beams with dimensions of 100 mm * 220 mm were casted and tested under two points loading. One beam considered as a reference (unstrengthened) beam. Five residual beams were strengthened using CFRP sheets with various configurations. From the results, it was observed that all strengthened beams showed higher ultimate load capacity than that of the control beam. On the other hand, it was found that a progressive reduction in flexural ductility and toughness of beams with strengthening in one face and two faces with horizontal fiber direction. The highest decrease in flexural ductility and toughness for strengthened beams with horizontal fiber direction in comparison to control beam were 63% and 54%, respectively. On the contrary, the flexural ductility and toughness of strengthened beams increased with strengthening by vertical fiber direction. Additionally, the maximum percentage of increase in flexural ductility and toughness were 41% and 54%, respectively in comparison with control beam.

استخدام المواد المركبة الملتصقة خارجيا مثل الياف الكاربون البوليميرية تعتبر طريقة مناسبة ومتطورة لتقوية واصلاح العتبات الخرسانية المسلحة. قدمت في هذه الدراسة تحريات عملية لدراسة تصرف الانثناء للعتبات الخرسانية المسلحة والمقواه بألياف الكاربون بطريقه غير متناظرة. تأثير عدد الوجوه التي تم تقويتها واتجاه الالياف على مقاومة الانثناء تم التحقق منها. ستة عتبات مسلحة بأبعاد 100مم × 200مم قد صبت وفحصت تحت نقطتي تحميل. عتبه واحده اعتبرت عتبة مرجعيه (غير مقواه بألياف الكاربون). العتبات الخمس المتبقية قد قوت باستخدام الياف الكاربون بترتيبات مختلفة. من خلال نتائج الفحص تم ملاحظة أن كل العتبات التي تمت تقويتها بطريقة غير متناظرة كانت ذات سعة تحمل اعلى بالمقارنة مع العتبة المرجعية الغير مقواه. ومن ناحية اخرى فقد وجد ان هنالك انخفاض تدريجي في مطيلية الانثناء والمتانة للعتبات بالتقوية بوجه واحد وبوجهين وباتجاه الياف افقي. اعلى انخفاض في المطيليلة والمتانة للعتبات المقواة باتجاه الياف افقي بالمقارنة مع عتبة السيطرة كانت 63٪ و 54٪ عل التوالي. على العكس، مطيلية الانثناء والمتانة للعتبات المقواة ازدادت بالتقوية باتجاه الياف عموديه. بالإضافة، نسبة الزيادة القصوى في المطيلية والمتانة كانت 41٪ و 54٪ على التوالي بالمقارنة مع العتبة المرجعية. ER -