TY - JOUR ID - TI - Impact Strength for the 3D Textiles Fiber Reinforced Cementitious Composites Plates تحمل الصدمة للصفائح السمنتية المركبة والمسلحة بنسيج زجاجي ثلاثي الابعاد AU - Waleed A. Abbas وليد عبد الرزاق عباس AU - Ikbal N. Gorgis أقبال نعيم كوركيس AU - Nadia Moneem نادية منعم عبدالحسين PY - 2018 VL - 12 IS - 1 SP - 96 EP - 109 JO - Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية SN - 19927428 2706686X AB - The use of textile reinforcement made from non-corrosive materials, such as carbon and glass can reduce the required concrete material; this is known as Textile Reinforced Concrete (TRC). This study deals with plate specimens having dimension of 500×500×40mm tested under impact load at 28 and 90 days age under two conditions of ends, simply supported and fixed. Cement mortar with about 60 MPa, 7cm cube compressive strength at 28 days was designed for casting the plates. Plate specimens were divided into four groups, they consist of reference plates (no reinforcement) and plates reinforced with 3D glass fabric having three different thicknesses 6, 10 and 15mm.The results indicate that using 3D textile glass fabric cause an increase in number of blows, reduce in final stage deflection, an improvement in toughness and energy absorption under impact loads. Using 3D textile glass fiber with 10mm thickness gave higher number of blows for 28 and 90 days as compared with 6 and 15 mm. Plates with slice 6mm 3D textile glass fiber in two way reinforced has significantly enhancement in number of blows, the improvement was about (80 - 125%) and (128.5- 114. 3%) for 28 and 90 days respectively. The specimens showed increase in the energy absorption, besides the number and width of cracks was reduced and only few cracks are propagated up to the edge of the plates.

ان استخدام الالياف اوالنسيج بابعاد ثلاثية مصنوعة من مواد زجاجية اوكاربونية ذات طبيعة كيميائية خاملة يؤدي الى تقليل بكمية المواد السمنتية الداخلة بالخلطة الخرسانية. حيث تضمنت هذه الدراسة قياس تحمل الصدمة لصفائح بابعاد 500*500*40 ملم وبعمر 28 و90 يوم بواقع نوعين من الشروط الحدودية (بسيطة وثابتة). وتم صب الصفائح باستخدام مونة اسمنتية ذات مقاومة انضغاط 60 ميكاباسكال بعمر 28 يوم. قسمت الصفائح الى اربع مجاميع مؤلفة من صفائح بدون استخدام اي الياف لغرض المقارنة وصفائح مسلحة بثلاث اسماك مختلفة (6و10و15ملم) من الياف زجاجية ثلاثية الابعاد. فحصت الصفائح تحت تاثير حمل الصدمة واظهرت النتائج ان استخدام نسيج زجاجي ثلاثي الابعاد ادى الى تحسن في خواص الصفائح وذلك بزيادة عدد الضربات وتقليل الانحرافات وزيادة في مقدار الطاقة الممتصة. ان استخدام الياف زجاجية بسمك 10 ملم تطلب زيادة في عدد الضربات المطلوبة للفشل بعمر فحص 28 و90 يوم مقارنة مع سمك 6 و15 ملم. كما ان استخدام نسيج ثلاثي الابعاد على شكل شراح بطبقتين وبسمك 6 ملم ابدى قوى ربط اكبر وتحسن بعدد الضربات ، حيث كان التحسن بمقدار 80-128 % و128.5-114.3% لاعمار 28 و90 يوم اضافة الى ان جميع الصفائح اظهرت زيادة في امتصاص الطاقة ونقصان في سمك وعدد الشقوق خلال الفحص . ER -