TY - JOUR ID - TI - Material Selection for Competition–A Case Study for Air Coolers AU - Luma A. H. Al Kindi AU - Amjad Husien Jasim AU - Entsar Nife Farhan AU - Batool Ibraheem Jameel PY - 2018 VL - 26 IS - 3 SP - 274 EP - 306 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Competition is one of the most important challenges that is facing the marketing of industrial products in today's markets. In this research study of the impact of material selection factor for air coolers of different materials is applied. Investigation on the air cooler windows which are part of the body of air coolers is conducted. Corrosion resistance, thermal conductivity, strength of material, weight, shape, cost and manufacturing process are the factors that are applied and calculated on three types of materials Aluminum, Galvanized steel and polypropylene. The physical properties of the three mentioned materials are used to calculate Merit Index .The corrosion average, according to Tafel Method depending the corrosion current and adopting contactors for the anodic and cathodic metals behaviors is performed. ANSYS is adopted using the three samples for the selected materials Aluminum, Galvanized steel and polypropylene to measure maximum stress and deflection are measured. Accordingly, the results are compared to choose the best alternative. It is observed that the polypropylene is the best choice depending three factors while the aluminum material is better depending two factors and the galvanized steel is regarded as the best in only one factor, the rest factors are identical when choosing an alternative material for manufacturing the air cooler windows.

تعتبر المنافسة من اهم التحديات التي تواجه تسويق المنتجات الصناعية في الوقت الحاضر. في هذا البحث تمت دراسة تأثير عامل اختيار المواد لمنتج صناعي (شباك مبردات الهواء) باعتماد معايير مقاومة التأكل، التوصيل الحراري، مقاومة المواد، الوزن، الشكل، الكلفة واسلوب التصنيع. تم التطبيق على شباك مبردة الهواء بموجب المواصفات الفنية المعتمدة في شركة الهلال واعتمدت الاختبارات ثلاث نماذج من كل من سبيكة الالمنيوم 3003 والحديد المغلون والبولي بروبلين باسماك واوضاع مختلفة. باعتماد المواصفات الهندسية لكل مادة تم حساب ال Merit Index وكذلك تم اجراء اختبارات مقاومة التآكل اضافة الى اعتماد برنامج ANSYSلحساب معدلات التشوه والاجهادات القصوى لكل عينة. تمت مقارنة النتائج للوصول الى الخيار الانسب من بين الخيارات التي اعتمدت وبينت النتائج ان سبيكة الالمنيوم 3003 هي الاختيار الامثل باعتماد معيارين في حين ان البولي بروبلين كان الخيار الانسب بمقارنة ثلاث معايير، اما الحديد المغلون فكان افضل الخيارات في معيار واحد فقط، المعايير الاخرى كانت متماثلة في اختيار المادة البديلة المعتمدة في تصنيع شباك مبردة الهواء. ER -