@Article{, title={Study the Effect of Titanuim Particles Addition on the Some mechanical Properties of Hybrid Composite Materials تا ثير اضافة دقائق التيتانيوم على بعض الخواص الميكانيكية لمتراكب بوليمري هجيني}, author={م. رنا علي حسين and أ.م. احمد هادي عبود}, journal={journal of kerbala university مجلة جامعة كربلاء}, volume={16}, number={1}, pages={117-126}, year={2018}, abstract={This research studied the mechanical properties (tensile strength ,impact strength and Brinell hardness) for hybrid material with matrix of unsaturated polyester reinforced by four different weight fraction (5,10,15,20)% of titanium particales, with constant percentage 10% of carbon or glass fiber. Standard samples for tensile, impact and hardness test were prepared. Three samples for each percentage and the average of the three recorded data were taken , the results showed high improvement in the tensile strength from (11.7,22) MPa to (18,29.5) MPa for hybrid polyester reinforced by 10% glass and carbon fiber with 15% weight fraction of titanium particles respectively. Impact test also showed good improvement from (75,160)KJ/m2 to (115,210)KJ/m2 for hybrid polyester with 15% titanium particles. The hardness increased from (98,393)HBN for hybrid polyester with 15% titanium . Generally reinforced by 15% weight fraction for titanium particles improved the mechanical properties more than the rest weight fraction by titanium particles and the same reinforced condition.

في هذا البحث تم دراسة الخواص الميكانيكية (مقاومة الشد ,مقاومة الصدمة , وصلادة برينل) لمادة متراكبة هجينة اساس من البولي استر غير المشبع مقواة بدقائق التيتانيوم وبأربعة نسب وزنية لكل نوع (5%,10%,15%,20%) مع الياف الكاربون والياف الزجاج وبنسبة ثابتة 10%,حيث تم تصنيع عينات قياسية لكل من اختبار الشد ,الصدمة وصلادة برينل وبواقع ثلاث نماذج لكل نسبة وزنية وتم اخذ معدل القراءات الثلاث لكل من الاختبارات اعلاه .اظهرت النتائج تحسن كبير في مقاومة الشد من (11.7,22 Mpa) للبولي استر غير المشبع مع الياف الكاربون والياف الزجاج الى (18,29.5 Mpa) بعد التقوية وبنسبة وزنية 15% لدقائق التيتانيوم على التوالي. اما اختبار مقاومة الصدمة فقد اظهرت تحسن كبير بمقدار مقاومة الصدمة من 160,75) KJ) الى (210,115)KJ/m2 بألياف الزجاج والكاربون على التوالي بعد التقوية 15% بدقائق التيتانيوم. كذلك ارتفعت قيمة الصلادة من (260,70)HBN الى (393.98)HBN بعد التقوية 15% تيتانيوم للبولي استر النقي المقوى 10% لألياف الكاربون والياف الزجاج على التوالي .وبصورة عامة فان التقوية بنسبة 15% بدقائق التيتانيوم اعطت تحسن اعلى في الخواص الميكانيكية من بقية النسب ولنفس ظروف التقوية .} }