TY - JOUR ID - TI - PREPARATION AND INVESTIGATION OF SOME MECHANICAL PROPERTIES OF UNSATURATED POLYESTER RESIN REINFORCED BY HYBRID NANOPARTICLES تحضير ومناقشة بعض الخصائص الميكانيكية لراتنج البوليستر الغير مشبع المقوى بدقائق نانوية هجينة AU - 1 Sihama Issa Salih 2Wleed Bdaiwi Salih 3 Husam Sakin Hamad سهامة عيسى صالح وليد بديوي صالح حسام ساكن صالح PY - 2018 VL - 18 IS - 2 SP - 339 EP - 354 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - In this study, nano-composite of polymeric materials, prepared from unsaturated polyester resin (UP). Two groups of nanocomposites were prepared by Hand Lay-up method. The first group consists from (UP) reinforced by hybrid nanoparticles consisting of a mixture of zirconium oxide and yttrium oxide (30 mol%Y2O3- ZrO2) with particles size (83.98nm). The second group consists of (UP) reinforced by zirconia nanoparticles (ZrO2) with particle size (47.23nm). The effect of volume fraction (0.5%, 1%, 1.5%, 2%, 2.5%, 3%) of the nanoparticles additives on some mechanical properties of composites materials was studied also. The results shown that the values of the flexural modulus, impact strength and fracture toughness increased, as the volume fraction ratio of the nanoparticle increased for both groups of nanocomposites, while flexural strength values decreased with the increased the volume fraction ratio of the nanoparticles for both groups of nanocomposites also. As well as, the unsaturated polyester resins reinforced by hybrid nanoparticles has higher mechanical properties as compared with their counterparts of composites reinforced by zirconia nanoparticles only. The morphological formation of the fracture surface showed a close interconnection between all components of the prepared polymeric compositions. This reinforce a good compatibility between unsaturated polyester resins and reinforcement nanoparticles, which enhancement the mechanical properties.

في هذه الدراسة،تم تحضير مواد متراكبة ذات اساس بوليميري من راتنج البولي استر غير المشبع (UP Unsaturated Polyester Resin). حُضرت مجموعتان من المتراكبات النانوية بطريقة القولبة اليدوية (Hand Lay-up ) .المجموعة الأولى تتكون من راتنج البولي أستر غير المشبع (UP) مقوات بالدقائق النانوية الهجينية تتكون من مزيج من أكسيد الزركونيوم وأكسيد الإيتريوم وبنسبة (30 mol%Y2O3- ZrO2) وبمعدل حجم حبيبي nm)83.98) نانومتر, المجموعة الثانية تتكون من ( UP ) مقواة بدقائق أوكسيد الزركونيوم النانوية (ZrO2) وبمعدل حجم حبيبي (47.23 ) نانومتر. تم دراسة تأثير الكسر الحجمي (0.5٪، 1٪، 1.5٪، 2٪، 2.5٪، 3٪) للدقائق التقوية النانوية المضافة على بعض الخواص الميكانيكية للمواد المتراكبة. وأظهرت النتائج أن قيم معامل الانحناء ومقاومة الصدمة ومتانة الكسر ازدادت مع زيادة نسبة الكسر الحجمي للدقائق النانوية لكلا المجموعتين من المتراكبات النانوية. في حين انخفضت قيم مقاومة الإنحناء مع زيادة نسبة الكسر الحجمي لدقائق التقوية النانوية ولكلا المجموعتين من المركبات النانوية أيضا. وان راتنج البولي أستر المدعم بالدقائــــق الهجينية النانوي يمتلك خصائص ميكانيكية أعلى من نظيرتها المقواة بدقائق الزركونيوم النانوية. أظهر التشكيل المورفولوجي لسطح الكسر الترابط الوثيق بين جميع مكونات المتراكيبات البوليمرية المحضرة. هذا يعزز التوافق الجيد بين راتنجات البوليستر غير المشبع والجسيمات التقوية النانوية, وهذا ما يعزز الخواص الميكانيكية . ER -