TY - JOUR ID - TI - Experimental Study the Effect of Tool Design on the Mechanical Properties of Bobbin Friction Stir Welded 6061-T6 Aluminum Alloy دراسة تأثير تصميم عدة اللحام بالخلط الاحتكاكي نوع (Bobbin) على الخواص الميكانيكية لسبيكة المنيوم (6061-T6) AU - Samir Ali Amin سمير علي أمين AU - Mohannad Yousif Hanna مهند يوسف حنا AU - Alhamza Farooq Mohamed الحمزة فاروق محمد PY - 2018 VL - 14 IS - 3 SP - 1 EP - 11 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - Bobbin friction stir welding (BFSW) is a variant of the conventional friction stir welding (CFSW); it can weld the upper and lower surface of the work-piece in the same pass. This technique involves the bonding of materials without melting. In this work, the influence of tool design on the mechanical properties of welding joints of 6061-T6 aluminum alloy with 6.25 mm thickness produced by FSW bobbin tools was investigated and the best bobbin tool design was determined. Five different probe shapes (threaded straight cylindrical, straight cylindrical with 3 flat surfaces, straight cylindrical with 4 flat surfaces, threaded straight cylindrical with 3 flat surface and threaded straight cylindrical with 4 flat surfaces) with various dimensions of the tool (shoulders and pin) were used to create the welding joints. The direction of the welding process was perpendicular to the rolling direction for aluminum plates. Tensile and bending tests were performed to select the right design of the bobbin tools, which gave superior mechanical properties of the welded zone. The tool of straight cylindrical with four flats, 8 mm probe and 24 mm shoulders diameter gave better tensile strength (193 MPa), elongation (6.1%), bending force (5.7 KN), and welding efficiency (65.4%) according to tensile strength.

اللحام بالخلط الاحتكاكي بأداة تشبه البكرة (bobbin) يكون مختلف عن اللحام المتعارف علية للطريقة نفسها, حيث يتم لحام قطعة العمل من الوجهين الاعلى و الاسفل في للشوط نفسها . يتضمن هذا الأسلوب لحام اللوحين من دون الانصهار. في هذا العمل، تم التحقق من تأثير تصميم الأداة على الخواص الميكانيكية لوصلات اللحام لسبيكة الالمنيوم نوع (6061-T6) و بسمك (6,25 ملم) والملحومة بطريقة اللحام الخلطي الاحتكاكي نوع (bobbin)،و كذلك تحديد أفضل تصميم لأداة اللحام نوع (bobbin). خمسة أشكال مختلفة لوتد أداة اللحام (أسطواني مستقيم مسنن, أسطواني مستقيم ذو 3 أوجه، أسطواني مستقيم ذو 4 أوجه، أسطواني مستقيم مسنن ذو 3 أوجه و أسطواني مستقيم مسنن ذو 4 أوجه) وبأبعاد مختلفة للأداة ( الدبوس و الأكتاف ) استخدمت لأجراء عملية اللحام. أتجاه عملية اللحام كان عموديا على أتجاه الدرفلة لألواح الألمنيوم. اختبارات الشد والانحناء تم اجراؤها لأختيار التصميم الأفضل لأداة اللحام نوع (bobbin) والتي تعطي افضل الخواص الميكانيكية لمنطقة اللحام. الأداة ذات الاسطواني المستقيم ذو 4 أوجه، بقطر للوتد (8 mm) والاكتاف (24 mm) أعطت افضل مقاومة شد (193 ميكا باسكال) وأستطالة (6.1%) مع أقصى قوة انحناء (5.7 كيلو نيوتن) وأفضل كفاءة لحام (65.4%) نسبة الى مقاومة الشد. ER -