@Article{, title={Evaluation The Performance Geodetic of the Receivers Using Static Positioning Technique تقييم اداء متسلمات النظام العالمي للملاحة بالأقمار الاصطناعية المختلفة باستخدام أجهزة وتقنيات مختلفة}, author={Omar Ali Ibrahim عمر علي ابراهيم العبيدي}, journal={Journal of Engineering مجلة الهندسة}, volume={24}, number={10}, pages={98-105}, year={2018}, abstract={Global Navigation Satellite System (GNSS) is considered to be one of the most crucial tools for different applications, i.e. transportation, geographic information systems, mobile satellite communications, and others. Without a doubt, the GNSS has been widely employed for different scientific applications, such as land surveying, mapping, and precise monitoring for huge structures, etc. Thus, an intense competitive has appeared between companies which produce geodetic GNSS hardware devices to meet all the requirements of GNSS communities. This study aims to assess the performance of different GNSS receivers to provide reliable positions. In this study, three different receivers, which are produced by different manufacturers, were fixed to form a triangle. Simultaneous observations were made in static mode (2.5 to 3 hours). This observation technique was carried out three times by changing the location of receivers in each time to ensure that three receivers observed each station three times. To evaluate the performance of each receiver, OPUS web-based processing software and TOPCON TOOLS were used to process the raw GNSS observations. The distances between adjacent stations were computed for each observation and compared to standard distances, which were measured using a total station. Furthermore, the internal angles were also computed and compared to those measured by Total Stations. The results showed that some calculated distances are closer to the corresponding distances measured by the total station. This indicates that the receivers involved in the composition of these distances are the most accurate.

يعد النظام الملاحي العالمي من الانظمة المهمة في العديد من التطبيقات الجيودسية الواسعة والمختلفة، فقد استخدم في مجالات تحديد مواقع ووسائل النقل المختلفة مثل السيارات والطائرات والسفن. ومن ناحية اخرى يستخدم في العديد من التطبيقات العملية والعلمية كأنتاج الخرائط والمسح الارضي والرصد المستمر للإنشاءات الضخمة. لقد تنافست مؤسسات وشركات ضخمة في انتاج المتسلمات التي تستخدم النظام الملاحي العالمي لمعرفة وتحديد المواقع والاحداثيات الارضية. الا ان السؤال المطروح الان هو كيف يتم التأكد من ان هذه المواقع او الاحداثيات التي تزودنا بها تلك المتسلمات بمختلف انواعها هي احداثيات دقيقة وغير مخطوءة ؟ وهذا ما سيتم ايضاحه قي هذه الدراسة.حيث استخدمت ثلاث متسلمات مختلفة النوع ومن منشئين مختلفين لرصد ثلاث نقاط (تكون على شكل مثلث) في نفس الوقت بطريقة الرصد الثابت وبفترة زمنية للرصد تتراوح بين ساعتين ونصف الى ثلاث ساعات. تم اتباع اسلوب معين للرصد مبني على اساس التبادل بين مواقع المتسلمات في كل عملية رصد لكي يتم رصد كل نقطة بثلاث متسلمات من خلال ثلاث مجاميع للرصد. وللحصول على دقة عالية تتراوح من 3-5 ملم تم اجراء عمليات التصحيح على النقاط المرصودة بإرسالها الى موقع معين على الشبكة العنكبوتية (OPUS) اضافة الى تصحيح خط القاعدة الاساس باستخدام برنامج (TOPCON TOOLS). وبعدها يتم استخراج المسافات بين تلك النقاط في كل عملية رصد وهي تمثل اطوال اضلاع المثلث. ومن ثم قياس المسافات بين النقاط الثلاث (التي تمثل اطوال اضلاع المثلث) بأسلوب اخر عن طريق استخدام جهاز المحطة المتكاملة واجراء عملية التحقق من هذه المسافات عن طريق حساب الزوايا الداخلية للمثلث بقانون (COSINE). اظهرت النتائج ان المسافات المحسوبة بالأسلوب الاول تتباعد وتتقارب من المسافات المقيسة بالأسلوب الثاني وبعد تحليل النتائج نستنتج ان المسافات التي تتقارب تكون متأتية دائما من نفس المتسلمات وهي الادق.} }