TY - JOUR ID - TI - Analytical Modeling and Results Evaluation of Composite Open Web Steel Joists Behavior الموديل التحليلي وتقييم النتائج لتصرف العتبات الفولاذية المركبة المفتوحة الوترات AU - Ali Farhan Hadeed علي فرحان حديد AU - Laith Khalid Al-Hadithy ليث خالد الحديثي AU - Riyadh J. Aziz رياض جواد عزيز PY - 2018 VL - 21 IS - 3 SP - 356 EP - 367 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - In this study, the analytic model (Azmi Model) had been considered for computation the load capacities of the composite open web steel joists and compared them with those obtained from experimental tests. The capacities of seven joists had been studied, each including one of the following variables (distribution of headed studs, connection degree of the connectors, inclination of the web, shape of the web, density of slab concrete, length of connectors).Theoretically, according to the Analytic model, the referenced joist of (45° web inclination , uniformly distributed ,over connected ,short headed studs) exhibited maximum load capacity of (18.45) ton, while the joist of (45° web inclination, uniformly distributed, under connected, short headed studs) exhibited minimum load capacity of (16.23) ton at yield point of bottom chord. Experimentally, the referenced joist exhibited maximum load capacity of (15.51) ton, while the joist of (34° web inclination, uniformly distributed, over connected, short headed studs) exhibited (12.49) ton load capacity. The load capacities values of the tested joists ranged between (67%-85%) of the predicted values according to the analytic model.

في هذه الدراسه أَعتمد البرنامج التحليلي ( Azmi Model ) لحساب سعة التحمل للروافد الفولاذيه المركبة مفتوحة الوترات ومقارنتها مع تلك التي تم الحصول عليها من الاختبارات العملية .سبعة روافد تمت دراسة تحملها عمليا بموجب المتغيرات ( توزيع روابط القص بشكل منتظم او غير منتظم, درجة الربط لرابط القص, زاوية ميل اضلاع الجذع, شكل الجذع, كثافة الخرسانية للبلاطة , طول رابط القص). تحليليا كان أعلى تحمل (18.45) طن للرافدة المرجعية ذات الميل الجذعي (°45 ) وبرابط قص قصير منتظم التوزيع عالي الربط بينما أقل تحمل هو للرافدة ذات الميل الجذعي (°45 ) وبرابط قص قصير منتظم التوزيع واطي الربط مقداره (16.23) طن عند حد الخضوع للوتر السفلي في حين أعطت النتائج العملية قيما حملية (15.51) طن للراقدة المرجعية و (12.49) طن للرافدة ذات الميل الجذعي(°34 ) وذات رابط قص قصير منتظم التوزيع عالي الربط . تراوحت سعة التحمل العملية للروافد من ( %67 - %85 ) من النتائج النظرية بموجب الموديل التحليلي . ER -