@Article{, title={“Effect of Polypropylene Fibers on Producing Sustainable Accelerated Hardened Cementitious Materials” تأثير ألياف البولي بروبلين في أنتاج مواد أسمنتية مستدامة سريعة التصلب}, author={Ziyad Majeed Abed and Maan Salman Hassan and Rana Hameed Faisal}, journal={journal of kerbala university مجلة جامعة كربلاء}, volume={16}, number={2}, pages={150-159}, year={2018}, abstract={The aim of this research is to produce environmental friendly cementitious materials using polypropylene fibers as recyclable reinforcement materials and silica fume (side-product in manufacturing of ferro-silicon alloys and silicon metal) material. The manufacturing process includes using accelerating curing with carbon dioxide for the fresh cementitious mixtures to decrease setting time and improve hardening, particularly in precast concrete plants.Mix proportions used in this research were cement: silica fume: Sand (1: 0.75: 1.3) and 0.5 w/c ratio. Also, four percentages of polypropylene fibers are used (0, 0.3, 0.9, and 1.5%) by weight of cement. All specimens are exposed to 100% of carbon dioxide gas concentration for 2 hours. Compressive, flexural, and direct tensile strengths have been tested at 7 and 28 days. The results show a significant improvement of flexural strength and direct tension for specimens. The increasing percentages of flexural strength and direct tension with (1.5% polypropylene) compared with control mixture at age 28 days were about (+ 28%) and (+ 117%) respectively.

ان الهدف الرئيسي في هذا البحث هو انتاج مواد سمنتية صديقة للبيئة باستعمال الياف البولي بروبلين كمواد تسليح قابلة لاعادة الاستعمال وكذلك مادة غبار السيليكا (منتج ثانوي في صناعة سبائك الحديد والسيليكون ومعدن السليكون). ان عملية التصنيع تتضمن الانضاج المعجل باستعمال ثنائي اوكسيد الكربون للخلطات السمنتية الطازجة من اجل تقليل زمن التجمد وتحسين التصلب وخصوصا في معامل الخرسانة مسبقة الصب .نسب الخلط المستعملة في هذا البحث هي سمنت: سيليكا فيوم :رمل ( 1.3 : 0.75 : 1) ونسبة الماء الى السمنت هي 0.5 .اضافة الى ذلك، تم استعمال اربع نسب من الياف البولي بروبلين هي (0,0.3,0.9,1.5 )% من وزن السمنت. تم تعريض كل النماذج الى غاز ثنائي اوكسيد الكربون وبتركيز 100% ولمدة ساعتين . تم فحص مقاومة الانضغاط , الانثناء, والشد المباشر بعمر 7 و 28 يوم . بينت النتائج تحسن ملحوظ في مقاومة الانثناء والشد المباشر للنماذج .نسب الزيادة في مقاومة الانثناء والشد المباشر باستخدام نسبة (1.5% بولي بروبلين) مقارنة مع الخلطة المرجعية وبعمر 28 يوم كانت حوالي (+28%)و(+117%) على التوالي .} }