TY - JOUR ID - TI - The Effect of CatalystType on TheMicrostructure and Magnetic Properties of Synthesized Hard CobaltFerriteNanoparticles. AU - Shaima'aJaber Kareem AU - Ali Abdul HameedRajeh PY - 2018 VL - 26 IS - 4 SP - 282 EP - 291 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - A sol-gel process prepared the nanoparticles of hard cobalt ferrite (CoFe2O4). Cobalt nitrate hexahydrate(Co (NO3)2⋅6H2O), iron nitrate nonahydrate(Fe (NO3)3⋅9H2O) with using two catalysis acid (citric acid) and alkaline (hydroxide ammonium) were used as precursor materials. Crystallization behavior of the CoFe2O4 nanoparticleswere studied by X-ray diffraction (XRD). Nanoparticles phases can change from amorphous to spinel ferrite crystalline depending on the calcinated temperature at 600°C, with using citric acid as a catalysis without finding forgone phase, while using hydroxide ammonium was shown second phase (α-Fe2O3) with CoFe2O4. Crystallite size was measured by Scherrer’s formula about (25.327) nm and (27.119) nm respectively. Structural properties were investigated by FTIR,which was appeared main bond of (Fe-O), (Co-O), (C-O), and (H-O).Scanning electron microscopy (FE- SEM) was shown the microstructure observation of cobalt ferrite and the particle size at the range about (28.77-42.97) nm. Magnetization measurements were carried out on a vibrating sample magenometer (VSM) that exhibited hard spinel ferrite.

تم تحضير الجسيمات النانوية من الكوبالت الفرايت الصلب (CoFe2O4) بواسطة عملية سول-جل. نترات الكوبالت المائية(Co (NO3)2⋅6H2O)، ونترات الحديد المائية (Fe (NO3)3⋅9H2O) باستخدام اثنين من المحفزات: محفز حامضي (حمض الستريك) ومحفز قلوي (هيدروكسيد الأمونيوم). تم دراسة السلوك البلوري لجسيمات الفرايت النانوية بواسطة حيود الأشعة السينية. يمكن أن يتغير تركيب الجسيمات النانوية من الفرايتالعشوائي إلى الفرايتالسبينل البلوري اعتماداعند درجة حرارة حرق 600 درجة مئوية، مع استخدام حامض الستريك كمحفز تم الحصول على طور CoFe2O4مفرد نقي دون وجود أي اطوار ثانويه، في حين عند استخدام الأمونيوم هيدروكسيد كمحفز ظهر وجود الطور الثانوي(α-Fe2O3) مع CoFe2O4. اما قطر البلورة فتم حسابها بواسطة معادلة شيررScherrer’s formula وكان حوالي (25.327) نانومتر و (27.119) نانومتر على التوالي. دراسة الخصائص التركيبة تمت بواسطة فحص FTIR والتي ظهرت ارتباط رئيسي (Fe-O) و (Co-O) و (C-O) و (H-O). أظهر المسح المجهري الإلكتروني (FE-SEM) الخصائص التركيب الهيكلي للكوبالت الفرايت وحجم الحبيبي حوالي (28.77-42.97) نانومتر. اما القياسات المغناطيسية نفذت بواسطة مقياس الاهتزاز المغناطيسي VSM))والتي أظهرت وجود الفرايتالسبنلي الصلب. ER -