@Article{, title={Calculation of Wear Rate by Weight and Volume for Aluminum Samples}, author={FadhelAbbas Abdulla and NaderMajed Moustafa and Ehsan Sabah Al-Ameen}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={26}, number={7}, pages={331-339}, year={2018}, abstract={Two ways of calculating the wear rate was investigated experimentally by weight and volume using aluminum samples with different load (500g, 1000g, and 1500g) and different time of test (300 s, 600 s, and 900 s). The results show that, When the load increasing from 500 g to 1500 g the wear rate by weight increase by (83%, 80%, and 37%) for test time (300s, 600s, and 900s) respectively. Also, the increasing test time from 300s to 900 s causes increasing in wear rate by weight by (216%, 155%, and 136%) for load (500g, 1000g, and 1500g) respectively. Also, when the load increasing from 500 g to 1500 g the wear rate by volume increase by (740%, 612%, and 662%) for test time (300s, 600s, and 900s) respectively. Also, the increasing test time from 300s to 900 s causes increasing in wear rate by volume by (152%, 110%, and 128%) for load (500 g, 1000g, and 1500g) respectively.

تم التحقيق في طريقتين لحساب معدل التآكل بالوزن والحجمعمليا باستخدام عينات ألمنيوم مع حمل مختلف (500 جم، 1000 غرام،و1500 جم) ووقت اختبار مختلف (300 ثانية، 600 ثانية،و900 ثانية). تظهر النتيجة أنه عندما يزيد الحمل من 500 جم إلى 1500 جم فإن معدل التآكل بالوزن يزداد بنسبة (83٪ و80٪ و37٪) لوقت الاختبار (300sو600s و900s) على التوالي. كذلك، يزيد زمن الاختبار المتزايد من 300 إلى 900 ثانية من معدل التآكل حسب الوزن (216٪، 155٪،و136٪) للحمل (500 جرام، 1000 جرام، 1500 جرام) على التوالي. أيضا، عندما يزداد الحمل من 500 غم إلى 1500 غم معدل التآكل من خلال زيادة الحجم بنسبة (740 ٪، 612 ٪،و662 ٪) لوقت الاختبار (300s، 600s،و900 s) على التوالي. كذلك، يزيد زمن الاختبار المتزايد من 300 إلى 900 ثانية من معدل التآكل بالحجم بنسبة (152٪، 110٪،و128٪) للحمل (500 جرام، 1000 جرام، 1500 جرام) على التوالي.} }