@Article{, title={EFFECT OF GLASS ADDITION AND HEAT TREATMENT ON MECHANICAL PROPERTIES AND WEAR RATE OF ALUMINUM - 2% GRAPHITE تأثير النسب الوزنية لمادة الزجاج والمعاملة الحرارية على الخواص الميكانيكية ومعدل البلى لمتراكبات الألمنيوم - 2% كرافيت}, author={Hashim Shukur Hammood هاشم شكر حمود الكرغولي}, journal={DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية}, volume={10}, number={4}, pages={33-41}, year={2017}, abstract={This research studied the effect of the Heat Treatment on the Mechanical Properties and the Wear Rate of the pure Aluminum with a particle size of (≤53μm). The Aluminum is reinforced by graphite with a particle size of (≤63μm) with an addition of glass particles with different weight ratios of (3, 6, 9, and 12) Wt. % and a particle size was (≤ 53μm).Powder metallurgy technique has been used to manufactured the samples, where the samples are pressed uniaxial at room temperature with (500 Map), then sintering at (550 C0) for (2 hr.). After that, heat treatment is applied on the samples at (500 OC) for one hour and Quenched in water.There was a great improvement of the mechanical properties such as the hardens and the compressive strength. This improvement was proportional with the Weight ratio of the glass particles before and after the Heat Treatment.On the other hand, there was a decrease of the wear rate versus the increase of the Weight ratio of the glass particles and heat treatment.

يهدف هذا البحث الى دراسة تأثير اضافة دقائق الزجاج بنسب وزنية مختلفة Wt%(3,6,9,12) بحجم (≤53 μm) مع اضافة نسبة وزنية ثابتة % 2 من كرافيت بحجم جسيمي(≤ 63 μm) وتأثير المعاملة الحرارية على الخواص الميكانيكية ومعدل البلى للالمنيوم النقي وبحجم جسيمي (≤53 μm) .استُخدمت تقانة ميتالورجيا المساحيق لتصنيع النماذج اذ كبست النماذج على البارد بضغط كبس ( Mpa500) تم تلبيدها بدرجة حرارة (550 Co) ولمدة ساعتين ثم سُخنتْ النماذج الى درجة حرارة (500 Co) لمدة ساعة واحدة ثم بردت بالماء.بعدَ اجراء فحص الصلاده ومقاومة الانضغاط اظهرت النتائج حدوث تحسن كبير في الصلاده ومقاومة الانضغاط مع زيادة نسب اضافة دقائق الزجاج الى المتراكب قبل وبعد المعاملة الحرارية.تبين من خلال اختبار البلى حدوث انخفاض واضح مع زيادة نسب الاضافة قبل وبعد المعاملة الحرارية.} }