@Article{, title={Prediction of Fracture Pressure Gradient in Halfaya Oilfield التنبؤ بتدرج ضغط التكسير في حقل حلفايه النفط}, author={Neaam F. Hussain and Faleh H. M. Al Mahdawi}, journal={Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط}, volume={20}, number={1}, pages={1-7}, year={2019}, abstract={Fracture pressure gradient prediction is complementary in well design and it is must be considered in selecting the safe mud weight, cement design, and determine the optimal casing seat to minimize the common drilling problems. The exact fracture pressure gradient value obtained from tests on the well while drilling such as leak-off test, formation integrity test, cement squeeze ... etc.; however, to minimize the total cost of drilling, there are several methods could be used to calculate fracture pressure gradient classified into two groups: the first one depend on Poisson’s ratio of the rocks and the second is fully empirical methods. In this research, the methods selected are Huubert and willis, Cesaroni I, Cesaroni II, Cesaroni III, Eaton, and Daines where Poisson’s ratio is considered essential here and the empirical methods selected are Matthews and Kelly and Christman. The results of these methods give an approximately match with the previous field study which has been relied upon in drilling the previous wells in the field and Cesaroni I is selected to be the equation that represents the field under study in general. In the shallower formations, Cesaroni I is the best method; while in deepest formations, Eaton, Christman, and Cesaroni I are given a good and approximately matching. The fracture pressure gradient of Halfaya oilfield range is (0.98 to 1.03) psi/ft.

يعتبر التنبؤ وتقدير تدرج ضغط التكسير عملا مكملاً في تصميم البئر ويجب أن يؤخذ بنظر الاعتبار عند اختيار وزن طين الحفر الآمن وتصميم الأسمنت وتحديد مقعد التغليف الأمثل لتقليل مشاكل الحفر الشائعة. قيمة التدرج الدقيق للكسر الناتجة من الفحوصات التي تجرى على البئر أثناء الحفر مثل leak-off test ،formation integrity test ، cement squeeze ... الخ ؛ ومع ذلك ، لتقليل التكلفة الإجمالية للحفر ، هناك عدة طرق يمكن استخدامها لحساب تدرج ضغط الكسر المصنفة في مجموعتين: الأولى تعتمد على نسبة بواسون للصخور والثانية هي طرق تجريبية بالكامل. في هذا البحث ، الطرق المختارة هي Huubert and willis, Cesaroni I,: Cesaroni II, Cesaroni III, Eaton, and Daines حيث تعتبر نسبة بوايسون ضرورية هنا والأساليب التجريبية المختارة هي Matthews & Kelly و Christman وتعطي نتائج هذه الطرق تطابقًا تقريبًا مع الدراسة الميدانية السابقة التي تم الاعتماد عليها في حفر الآبار السابقة في الحقل وتم اختيار Cesaroni I لتكون المعادلة التي تمثل الحقل تحت الدراسه بصوره عام في الطبقات ذات الاعماق الضحله ، ان طريقة Cesaroni I هي الافضل ؛ بينما في الطبقات العميقه فإن كل من طريقة Eaton, Christman, و CesaroniI تعطي تطابق جيد ومتقارب. ان تدرج ضغط التكسير في حقل حلفايه النفطي يتراوح بين (0.98 و 1.03) psi/ft.} }