@Article{, title={Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites تأثير إضافة رماد قشور الرز – اوكسيد المغنسيوم على سلوك البلى لمواد متراكبة هجينة ذات أساس من األلمنيوم}, author={Abbas Y. Awad and Mohammed N. Ibrahim and Mohamed K. Hussein}, journal={Tikrit Journal of Engineering Sciences مجلة تكريت للعلوم الهندسية}, volume={25}, number={4}, pages={16-23}, year={2018}, abstract={A336.0 aluminum alloy used to fabricate hybrid composites using rice husk ash (RHA) and MgO particles as reinforcement. The influence of the particles on the wear behavior of A336.0 aluminum alloy as a matrix that reinforced with MgO and RHA was investigated. Firstly, the rice husk burned at 700°C and then heat treated at 1100°C for 2 hrs. The ash characterized by X-ray florescence and X-ray diffraction. Less than 53 and 125 micron are the particle sizes of MgO and RHA respectively. The hybrid composites manufactured using stir casting method in two steps. A336.0 aluminum alloy reinforced with 4:0, 3:1, 2:2, 1:3 and 0:4 of RHA: MgO with 10 wt% total reinforcement phase. Optical microscope and X-ray diffraction were used to characterize the prepared hybrid composites. Dry slidingwear, hardness, apparent density, percentage of porosity and coefficient of friction were examined. Results indicated that porosity, apparent density and hardness enhanced with increasing MgO, while increasing wt% of RHA decreased the apparent density. Results indicated that with inceasing the applied load the wearrate of the composites was enhanced. Coefficient of friction varies inversely with applied load and wt% of RHA. Hardness increased with increasing RHA while the friction coefficient and the wear rate decreased. The minimum wear rates were at 10% RHA and Al-alloy-(RHA-MgO) [3:1] composites, while the minimum friction coefficients were at 10% RHA composites.

تم استخدام سبيكة ألمنيوم نوع 0.A336 لتحضير مادة متراكبة باستخدام رماد قشور الرز )RHA )مع اوكسيد المغنسيوم )MgO )كمواد تقوية. اجريت دراسة تأثير الدقائق المضافة على سلوك البلى للمادة المتراكبة الناتجة. تم تحضير الرماد بحرق قشور الرز عند 700 مئوي ثم اجراء معاملة حرارية للرماد المتكون عند 1100مئوي ولمدة ساعتين بعدها اجريت فحوصات للرماد لتحديد كمية االكاسيد باستخدام االصدار الفلوري لالشعة السينية )XRF )وكذلك استخدام حيود االشعة السينية )XRD )لتحديد االطوار المتكونة. حجم دقائق المسحوق لكل من اوكسيد المغنسيوم والرماد كانت اقل من 53 و125 مايكرون على التوالي. عملية االنتاج كانت باستخدام طريقة الدوامة على مرحلتين لخلط :RHA (MgO )مع منصهر سبيكة االلمنيوم وبنسب وزنية )0:4 ,1:3 ,2:2 ,3:1 ,4:0 )لنسبة خلط كلية 10 .%تم اختبار كل من الصالدة، معدل البلى، معامل االحتكاك، النسبة المئوية للمسامية والكثافة الظاهرية باإلضافة الى اجراء اختبار حيود االشعة السينية والفحص المجهري لعينات المتراكبات الناتجة. اظهرت النتائج ان زيادة نسبة اوكسيدالمغنسيوم يزيد من نسبة المسامات والكثافة الظاهرية باإلضافة الى رفع صالدة المركبات الناتجة، حيث عند 10 %من اوكسيد المغنسيوم ستزداد المسامات ألعلى مستوى وتقل الكثافة. كما تبين ان الصالدة تزداد مع زيادة نسبة الرماد بينما يقل معدل البلى ومعامل االحتكاك. لوحظ ايضا ان معامل االحتكاك يتناسب عكسيا مع ازدياد نسبة الرماد والحمل المسلط. اقل معدل بلى كان عند العينة 10%RHA والعينة ]1:3( ]MgO: RHA ،)بينما اقل معامل احتكاك كان عند العينة 10%RHA.} }