TY - JOUR ID - TI - DEVELOPMENT OF A WASTE HEAT RECOVERY SYSTEM AU - Maathe Abdulwahwd Theeb AU - Ali Shukor Golam AU - Mohammed Hamid Alhamdo PY - 2018 VL - 22 IS - 2 conference proceedings (Part-6) SP - 166 EP - 182 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - In this work, focus is taken on developing a waste heat recovery system for capturing potential of exhaust heat from an air conditioner unit to be reused later. This system has the ability to store heat in phase change material (PCM) and then release it to a discharge water system when required. To achieve this goal, a Finned, Water-PCM, Double tube (FWD) system has been developed and tested. Spiral fins attached to the (FWD) system have been investigated for increasing the thermal conductivity of the PCM with and without copper network (CN). An experimental test rig that attached to an air-conditioner unit has been built to include 32 tubes of the FWD systems for both vertical and horizontal layouts during charging and water discharging processes. Transient 3-D, numerical simulations using (ANSYS Fluent14.0 software) have been developed to predict the thermal behavior for all types of FWD systems under investigation. Results show a significant performance improvement when using spiral fins with 6% (CN) during charging process at vertical position. As compared to the WFWD system, the FWD systems have been found to increase the PCM temperature gain of about 15.3% for SFWD system; 18.6% for SFWD system with 6% (CN) during charging process.

ER -