TY - JOUR ID - TI - Studying the effect of impurities Bi2O3 to SiO2 used in LCD screens دراسة تأثير اضافة Bi2O3 على SiO2 المستعملة في شاشات LCD AU - Wlla M. Mohammed ولاء محفوظ محمد PY - 2018 VL - 23 IS - 10 SP - 88 EP - 91 JO - Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة SN - 18131662 24151726 AB - In this study, a liquid crystal display LCD cell was prepared. with the windows made from a thin film of SnO2 add to it Bi2O3 by weight (0,1,3,5,7)% .The effect of adding optical and electrical properties of the cell was studied. The thin film was prepared by vacuum evaporation technique. It was added to use powder mixing technique. The results showed a decrease in the value of the current passing through the cell and an increase in resistance value from 9.7MΩ to 12.5MΩ. The results also showed an increase in the cell's ability to control the light and darkness it with lower voltages by increasing the add rate. This leads to a decrease power used of a single cell. The value of the capacitance is not affected by the addition of Bi2O3 and was stable at ( 3nf ±1% ).

في هذا البحث جرى تحضير خلية شاشة بلورات سائلة LCD. حيث صنعت من غشاء رقيق مكون منSnO2 وتمت اضافةBi2O3 بالطريقة الوزنية بنسب % (0,1,3,5,7). درست الخواص الضوئية والكهربائية للخلية وتأثير الاضافة عليها. ولتصنيع غشاء استعملت تقنية الترسيب الحراري بالفراغ. اما الاضافة فتمت بتقنية خلط المساحيق. بينت النتائج انخفاض بقيمة التيار المار بالخلية مما يؤدي الى ارتفاع في قيمة المقاومة من 9.7MΩ الى 12.5MΩ. النتائج بيت زيادة في قدرة الخلية على التحكم في حالتي الضوء والتعتيم عند فولتية اقل مما هي علية قبل التطعيم، مما يعني انخفاض في قيمة القدرة المستعملة لعمل الخلية الواحدة. بينت النتائج ايضا ان قيمة السعة لم تتأثر بشكل محسوس بإضافة Bi2O3 وكانت مستقرة عند القيمة (3nf ±1%). ER -