TY - JOUR ID - TI - Studies on Preparation and Characterization of Blend Polymers for Hydrogels Synthesis and Use for Protein Release دراسة حول تحضير وتشخيص هيدروجيلات من توليف البوليمرات واستخدامها في إطلاق البروتين AU - Fawzi H. Jabrail فوزي حبيب جبرائيل AU - Roua'a K. Al-Ojar رؤى قاسم الاُجار PY - 2019 VL - 28 IS - 2E: Chem. SP - 211 EP - 227 JO - Rafidain journal of science مجلة علوم الرافدين SN - 16089391 AB - Carboxy methyl cellulose, pectin, chitosan or acrylic acid– poly (vinyl alcohol) blend hydrogels were prepared using Glutaraldehyde (GLU) as chemical or sodium hexameta phosphate (SHMP) as physical cross-linking agent. The prepared hydrogels have carried the advantage properties of both blend materials and can be used for loading and releasing of BSA protein. The degree of swelling of the prepared hydrogels was measured due to their different functional groups in different pHs of (pH4, pH7 and pH9) in addition to the electrolyte solution of 0.1 N NaCl. The blend hydrogels are characterized for their chemical structure using FT-IR. The XRD analysis was investigated for determination of the hydrogels crystallographic structure. The differential thermal analysis DTA and scanning electron microscope SEM were depended to study the thermal stability and surface morphology of the hydrogel respectively. The hydrogels were loaded with BSA protein model, and time of loading at (1.5, 3.0, 4.5 and 6.0) hrs were measured, beside the pH of the loading solution of ph4, pH6 and pH8 were considered and the BSA concentrations of (0.5, 1.0, 1.5 and 2.0) g/L have been investigated for maximum loading percentages %Lmax of BSA on the hydrogels. Finally the loaded BSA was released under different release conditions in 0.9% w/vNaCl solution and pH4, pH6 and pH8 were depended and the BSA was tested to release at 15, 25 and 40oC releasing medium temperatures.

تم تحضير هيدروجيلات من توليف البوليمرات الطبيعية )الكاربوكسي مثيل سليلوزCMC والبكتين PE والكايتوسان(CS أَو من المونمر الصناعي حامض الأكريليكِ AA مع البولي (فينايل الكحول) PVA وباستخدام عامل التشابك الكيميائي الكلوتارالديهايد GLU او عامل التشابك الفيزيائي الهكساميتا فوسفات الصوديوم SHMP. وكانت الهيدروجيلات المحضرة تحمل الخواص المميزة للمواد المولفة وأظهرت قابليتها في تحميل أو إطلاق البروتينِ BSA. درجة انتفاخ الهيدروجيلات المحضرة تم قياسها بالاعتماد على مجاميعها الوظيفيةِ المختلفةِ في أوساط حامضية مختلفة ( pH7, pH4 وpH9) إضافة إلى المحلول الملحي الالكتروليتي 0.1NNaCl. إن الهيدروجيلات المولفة قد تم تشخيص تراكيبها الكيميائية بالاعتماد على مطياف الأشعة تحت الحمراء FTIR، كما وتم دراسة تحليلXRD لتقدير التراكيب البلورية للهيدروجيل. وقد اعتمد جهاز التحليل الحراري التفاضليDTA وجهاز المسح المجهري الألكترونِي SEMلدِراسَة الإستقراريةِ الحراريِة وبنية السطح (المورفولوجيا) للهيدروجيل على التوالي. لدراسة تحميل الهيدروجيل تم اعتماد بروتينِBSA كموديل للتحميل، قياس زمن التحميل بالاعتماد على الأوقات الآتية(1.5, 3.0, 4.5 and 6.0) hrs ، واعتماد الأس الهيدروجيني pH4) و pH6 و (pH8 لمحلول التحميل وكذلك تراكيز محلول BSA عند (0.5, 1.0, 1.5 and 2.0) g/L، وذلك للحصول على نسب التحميل المئويةِ القصوى %Lmax مِنْ BSA على الهيدروجيل. وأخيراً؛ تم إطلاق BSAالمحمّل تحت ظروف إطلاقِ مختلفةِ حيث اعتمد محلول NaCl0.9% w/vكوسط للإطلاق فيpH4 و pH6 وpH8 وعند درجات حرارة إطلاق في (15, 25 and 40)oC. ER -