TY - JOUR ID - TI - أستخلاص وفصل البلاديوم (II)الشبه كمي بواسطة بوليمر الأيثر التاجي "متعدد ثنائي بنزو-18-كراون-6" AU - Abbas N.M.AL-Sharify عباس نور الشريفي AU - Suham T.amine سهام توفيق امين AU - Kadhim . H كاظم خلف هاشم PY - 2006 VL - IS - 24 SP - 459 EP - 474 JO - Iraqi National Journal Of Chemistry المجلة العراقية الوطنية لعلوم الكيمياء SN - 22236686 AB - AbstractThis study included the extraction and separation of Copper(II) from its aqueous solutions, by using swelled crown ether (PDB18C6), and included the following: It was found that; the copper(II) is extracted when (pH=10), percentage extraction reached (E%=93.5).but Its extraction was impossible from the acidic media (HCl , H2SO4 , HNO3). The results also showed that the alkaline media was suitable for the extraction of copper(II), and the high percentage value for it’s equal to (E%=98) was obtained at [0.01M] from KOH. It was found from experiments that the best shaking time was (60) minutes. Adding ethanol to aqueous phase (40%V/V) at temperature gave the best extraction percentage for copper (II) (E%=64.2). Percentage extraction of copper(II) from the salt media (KCl, NaCl) were low in comparison with the alkaline media. The selectivity of saturated solid polymer towards the extraction of copper(II) ions, in the present of the positive ion and the negative ions , was also studied. The effect of temperature and thermodynamics functions on the process of extraction of copper(II) ions was studied, and it appeared that the extraction enthalpy ,has a negative value in the case of copper, which means that the extraction process is exothermic and the free energy for extraction showed negative value and the extraction entropy showed positive value at all temperatures. Which means that the reaction is instantaneous. The separation of copper from palladium ions was done on a chromatographic column filled with the substance (PDB18C6), which is treated previously with (2.0M) KOH solution, and by using the same solution as a mobile phase to elute Pd (II) first. The process was done on eight batchs, and in each batch (10ml) was used from the mobile phase, while in the case of other eluted back the copper from column, (1.0M) of HCl was used for five batchs, and in each batch (10ml) was used, and the speed of flow-rate for both ions was 1ml/min.

الخلاصةتضمنت هذه الدراسة استخلاص وفصل النحاس(II) بواسطة بوليمر الايثر التاجي المشبع بالماء PDB18C6 من محاليلها المائية وقد شملت الجوانب الآتية:بعد أن تمت دراسة العوامل المؤثرة على عملية استخلاص ايون النحاس لإيجاد الظروف المثلى للاستخلاص وجـد أن: يستخلص النحاس(II) عند (pH=10) إذ تصبح النسبة المئوية للاستخلاص في أعلى قيمة (E%=93.5). لوحـظ عـدم إمكانيـة استخـلاص النحـاس مـن الوسـط الحامضـي (HNO3 , H2SO4 , HCl) كما بينت النتائج أن الوسط القاعدي يعد من الأوساط الملائمة لاستخلاص النحاس(II) إذ تم الحصول على أعلى قيمة للنسبة المئوية للاستخلاص (E%=98) عند تركيـز (0.01)مولاري من محلول KOH. كذلك تم إيجاد أفضـل زمـن للتمـاس من خلال التجـارب هو (60 دقيقة) لمعقدات النحاس. أما عند إضافة الايثانول فإن أفضل نسبة استخلاص للنحاس(II) هي (E%=64.2) عندما يكون حجم الايثانول في الطور المائي (40%V/V) عند درجة حرارة .أظهرت النتائج أن نسبة استخلاص النحاس(II) من الوسط المتعادل (KCl , NaCl) تكون منخفضة مقارنة مع الوسـط القاعدي.درسـت انتقائيـة بوليمـر الايثـر التاجـي الصلب PDB18C6 المشبـع بالمـاء اتجاه استخلاص أيونات النحاس(II) بوجود الأيونات الموجبة والسالبة .كما تم دراسة تأثير درجة الحرارة والدوال الثرموديناميكية على عملية استخلاص النحاس(II) ، وتبين أن تغير انثالبي الاستخلاص له قيمة سالبة مما يعني أن عملية الاستخلاص باعثة للحرارة , وأظهر تغير الطاقة الحرة للاستخلاص قيمة سالبة وتغير انتروبي الاستخلاص قيمة موجبة لأيونات النحاس(II) في جميع درجات الحرارة دلالة على تلقائية التفاعل.كذلك تم فصل أيونات النحاس(II) والبلاديوم(II) على عمود كروماتوغرافي معبأ بمادة (PDB18C6) المعامل مسبقاً بمحلول (2.0) مولاري KOH، وباستعمال نفس المحلول كطور متحرك لاسترداد Pd(II) ولثمان دفعات، كل دفعة (10) مللتر من الطور المتحرك. ثم أمكن استرداد النحاس باستعمال (1.0) مولاري من حامض HCl ولخمس دفعات، كل دفعة (10) مللتر وبسرعة جريان (1) مللتر/دقيقة لكلا الأيونين. ER -