TY - JOUR ID - TI - Investigation the Optimization of Machining Parameters to Surface Roughness in Free Form Surface of Composite Material تحقيق ألامثلية لعوامل التشغيل للخشونة السطحية في السطوح المعقدة للمواد المركبة AU - Wisam K. Hamdan وسام كاظم حمدان AU - Reem S. Kazaal ريم صباح خزعل PY - 2019 VL - 15 IS - 2 SP - 60 EP - 69 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - The aim of this research is to investigation the optimization of the machining parameters (spindle speed, feed rate, depth of cut, diameter of cutter and number of flutes of cutter) of surface roughness for free-form surface of composite material (Aluminum 6061 reinforced boron carbide) by using HSS uncoated flat end mill cutters which are rare use of the free-form surface. Side milling (profile) is the method used in this study by CNC vertical milling machine. The purpose of using ANFIS to obtain the better prediction of surface roughness values and decreased of the error prediction value and get optimum machining parameters by using Taguchi method for the best surface roughness at spindle speed 4500 r.p.m, 920mm/rev feed rate, 0.6mm depth of cut, 10mm diameter, 2 flute.

يهدف هذا البحث الى تحقيق الامثلية لعوامل التشغيل ( سرعة القطع ومعدل التغذية وعمق القطع وقطر الاداة وعدد الحدود القاطعة الموجودة في العدة) للخشونة السطحية بالنسبة للسطوح المعقدة للمواد المركبة (سبيكة المنيوم 6061 مدعم بكاربيد البورون ) بوساطة استخدام ادوات قطع تفريز اصبعيه طرفيه غير مطليه مصنوعه من صلب السرعات العالية التي تكون نادرة الاستخدام مع السطوح المعقدة والتفريز الجانبي هي طريقة تشغيل تم العمل بها في هذه الدراسة باستخدام ماكنة التفريز العمودية الرقمية وقد استخدم نظام الاستدلال الغامض العصبي التكيفي للحصول على افضل التنبؤات لقيم الخشونة السطحية والتقليل من خطأ التنبؤ والحصول على عوامل تشغيل امثل باستخدام طريقة تاكوجي لأفضل خشونة سطحيه عند سرعة قطع 4500 دوره/ دقيقة، معدل التغذية 920 مم/دوره، عمق القطع 0.6 مم، قطر الاداة 10 مم،2 من الحدود القاطعة. ER -