@Article{, title={Effect of thickness on structural properties of BixSb2-xTe3 thin films تاثير السمك على الخصائص التركيبية لسبائك وأغشية BixSb2-xTe3 الرقيقة}, author={Hussain. M. Selman حسين محمد سلمان and Salma M. Shaban سلمى مهدي شعبان}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={17}, number={41}, pages={15-28}, year={2019}, abstract={BixSb2-xTe3 alloys with different ratios of Bi (x=0, 0.1, 0.3, 0.5, and 2) have been prepared, Thin films of these alloys were prepared using thermal evaporation method under vacuum of 10-5 Torr on glass substrates at room temperature with different deposition rate (0.16, 0.5, 0.83) nm/sec for thickness (100, 300, 500) respectively. The X–ray diffraction measurements for BixSb2-xTe3 bulk and thin films indicate the polycrystalline structure with a strong intensity of peak of plane (015) preferred orientation with additional peaks, (0015) and (1010 ) reflections planes, which is meaning that all films present a very good texture along the (015) plane axis at different intensities for each thin film for different thickness. AFM measurements for the thin films of BixSb2-xTe3, show that the grain size and the average surface roughness decreases with increasing of the percentage Bi for different thickness.

حضرت سبائك (BixSb2-xTe3) بنسب مختلفة من محتوى (x=0, 0.1, 0.3, 0.5, 2) Bi, وحضرت الاغشية الرقيقة لهذه السبائك باستخدام تقنية التبخير الحراري على قواعد من مادة الزجاج وعند ضغط واطئ ( (10-5 تور عند درجة حرارة الغرفة وبمعدل ترسيب(0.16, 0.5, 0.83) نانومتر بالثانية للسمك (100, 300, 500) نانومتر على التوالي. اظهرت فحوصات حيود الاشعة السينية لسبائك واغشية BixSb2-xTe3 بانها تمتلك تركيب متعدد التبلور, مع التوجيه القوي الشدة للسطح (015). لوحظ أن هناك قمم حيود اضافية، تتوافق مع الانعكاسات عن السطوح البلورية،1010) ) و (0015)، وهذا يعني أن جميع الأغشية ذات تركيب جيدعلى طول المستوى (015) بشدات مختلفة لكل غشاء رقيق. اظهرت قياسات AFM للاغشية الرقيقةBixSb2-xTe3 نقصان حجم الحبيبة ومتوسط خشونة السطح مع زيادة للنسبة المئوية ل Bi ولمختلف قيم السمك.} }