@Article{, title={Evaluation the Effect of Velocity and Temperature on the Corrosion Rate of Crude Oil Pipeline in the Presence of CO2/H2S Dissolved Gases تقييم تاثير السرعة والحرارة على معدل التاكل في انابيب النفط الخام بوجود الغازات المذابة CO2/H2S}, author={Haider Hadi Jasim}, journal={Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط}, volume={20}, number={2}, pages={41-50}, year={2019}, abstract={In this paper investigate the influences of dissolved CO2/H2S gases, crude oil velocity and temperature on the rate of corrosion of crude oil transmission pipelines of Maysan oil fields southern Iraq. The Potentiostatic corrosion test technique was conducted into two types of carbon steel pipeline (materials API 5L X60 and API 5L X80). The computer software ECE electronic corrosion engineer was used to predict the influences of CO2 partial pressure, the composition of crude oil, flow velocity of crude oil and percentage of material elements of carbon steel on the rate of corrosion. As a result, the carbon steel API 5L X80 indicates good and appropriate resistance to corrosion compared to carbon steel API 5L X60. The rate of corrosion acquired from the test in flow conditions is most significant than that in static conditions. The crude oil from Noor field has the largest value of corrosion rate, while the crude oil from Halfaya field has the lower value; other crude oils have moderate values. The dissolved CO2/H2S gases contribute by a low degree in internal pipeline corrosion because of the small concentrations.

في هذا البحث، تم دراسة تأثير الغازات المذابة CO2/H2S وسرعة النفط الخام على معدل التأكل في الانابيب المستخدمة في نقل النفط الخام من ستة حقول مختلفة في محافظة ميسان جنوب العراق وهي (نور، بزركان، الحلفاية، ابو غريب، وحقول فكه1 وفكه2). اجريت الاختبارات العملية باستخدام طريقة الجهد الساكن على نوعين من انابيب الصلب الكربوني وهما API 5L X60 و API 5L X60. استخدم البرنامج الكتروني ECE لحساب معدل التأكل وتقيم تأثير كل من الضغط الجزئي لغاز CO2، تركيب النفط الخام، سرعة النفط الخام ونسب العناصر المكونة للصلب على معدل التأكل. بينت النتائج العملية ان الصلب الكربوني من نوع API 5L X80 اظهر مقاومة اعلى للتأكل مقارنة بالصلب الكربوني API 5L X60. كما ان معدل التأكل في حالة الجريان يكون اكبر منه في حالة السكون. اظهر النفط الخام من حقل نور اعلى قيمة لمعدل التأكل، بينما النفط الخام من حقل الحلفاية امتلك اقل قيمة، النفط الخام من الحقول الاخرى امتلك قيم متوسطة من معدلات التأكل.} }