TY - JOUR ID - TI - Enhancing Drilling Parameters in Majnoon Oilfield تحسين ادائيه معاملات الحفر في حقل مجنون النفطي AU - Majid M. Majeed AU - Ayad A. Alhaleem PY - 2019 VL - 20 IS - 2 SP - 71 EP - 75 JO - Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط SN - 19974884 26180707 AB - The objective of drilling parameters optimization in Majnoon oilfield is to arrive for a methodology that considers the past drilling data for five directional wells at 35 degree of inclination as a baseline for new wells to be drilled. Also, to predicts drilling performance by selecting the applied drilling parameters generated the highest rate of penetration (ROP) at each section. The focal point of the optimization process is to reduce drilling time and associated cost per each well. The results of this study show that the maximum ROP could not be achieved without sufficient flow rate to cool and clean the bit in clay intervals (36" and 24") hole sections. Although the influence of combination of Weight on Bit (WOB), Round per minute (RPM), and hydraulic horsepower on the bit in (16", 12 1/4" and 8 1/2") hole sections is a key to reduce drilling time, therefore, the drilling parameters produced the fastest ROP per each section was considered as optimum parameters likely to apply for the future wells.

الغرض من تحليل معاملا ت الحفر المستخدمه في حقل مجنون النفطي هو الوصول الى وسيله تعتبر البيانات المتوفره للابار المحفوره سابقا" لخمسه ابار مائله بدرجه 35 اساس للابار التي سوف يتم حفرها مستقبلا", كذلك يتم استخدامها لتخمين ادائيه الحفر بالاعتماد على معاملات الحفر المختاره بناءا" على اقصى معدل اختراق لكل مقطع. الهدف الاساسي من اختيار المعاملات المثاليه اثناء عمليه الحفر هو لتقليل الوقت المرا د به الوصول الى نهايه كل مقطع وبالتالي تقليل الكلفه الاقتصاديه لكل بئر يتم حفره, الاستنتاج الرئيسي من هذا البحث هو معرفه المتطلبات الاساسيه للحصول على اعلى معدل اختراق والذي لايمكن تحقيقه من غير تسليط معدل جريان مناسب لتنظيف وتبريد الحافره في المقطعين (36" و 24") كذلك لايمكن تحقيق اعلى معدل اختراق من غير الموازنه بين الوزن المسلط على الحافره وسرعه دوران عمود الحفر في كل من المقاطع (16"و12.25"و 8.5"), لذلك كلما زاد معدل اختراق الحافره انخفض الوقت اللازم لاكمال البئر وبالتالي كلفه اقل بالاعتماد على معاملات الحفر التي حققت اعلى معدل حفرفي حقل مجنون النفطي. ER -