@Article{, title={Behaviour of Segmental Concrete Beams Reinforced by Pultruded CFRP Plates: An Experimental Study سلوك العتبات الخرسانية المصنعة من أجزاء القطع الخرسانية وصفائح البوليمر المسلحة بألياف الكاربون: دراسة عملية}, author={Ali Adel Abdulhameed علي عادل عبدالحميد and AbdulMuttalib Issa Said عبدالمطلب عيسى سعيد}, journal={Journal of Engineering مجلة الهندسة}, volume={25}, number={8}, pages={62-79}, year={2019}, abstract={The research aims to develop an innovative technique for segmental beam fabrication using plain concrete blocks and externally bonded Carbon Fiber Reinforced Polymers Laminates (CFRP) as a main flexural reinforcement. Six beams designed and tested under two-point loadings. Several parameters included in the fabrication of segmental beam were studied such as; bonding length of carbon fiber reinforced polymers, the surface-to-surface condition of concrete segments, interface condition of the bonding surface and thickness of epoxy resin layers. Test results of the segmental beams specimens compared with that gained from testing reinforced concrete beam have similar dimensions for validations. The results display the effectiveness of the developed fabrication method of segmental beams. The modified design procedure for externally bonded carbon fiber reinforced polymers ACI 440.2R-17 was developed for designing segmental beams. The experimental test values also compared with design values, and it was 93.3% and 105.8% of the design values, which indicates the effectiveness of the developed procedure.

الهدف من البحث هو أبتكار تقنية جديدة لتصنيع العتبات المكونة من أجزاء والمصنعة من القطع الخرسانية والمسلحة بصفائح البوليمر المعززة بألياف الكاربون والتي أعتمدت تسليح رئيسي لمقاومة قوى الأنحناء. تم تصميم وتصنيع ستة عتبات من هذا النوع وتم تعريضها لحملين مركزيين. تم دراسة مجموعة متغيرات ومنها طريقة التصنيع حيث تضمنت طول الصفائح الكاربونية وحالة الربط بين القطع الخرسانية وحالة سطح الربط للصفائح الكاربونية وسمك الراتنجات الايبوكسية الرابطة ومدى تأثيرها على مقدار تحمل العتبات ومقدار الهطول في منتصف فضاء العتبة وأيضاً تم مقارنة النتائج العملية مع عتبة خرسانية مسلحة تم تصنيعها بذات الأبعاد. بينت النتائج العملية كفاءة العتبات المبتكرة المكونة من أجزاء بالمقارنة مع العتبات الخرسانية المسلحة. أيضاً تم أعتماد طريقة معدلة لدليل التصنيع ACI 440.2R-17 والخاص بتعزيز العتبات الخرسانية المسلحة. تم مقارنة النتائج العملية للعتبات الخرسانية المكونة من أجزاء مع الطريقة المعدلة للتصميم المذكور وكانت النتائج تتراوح 93.3% - 105.8 % مع الطريقة المعدلة مما يدل على كفاءة الطريقة المعدلة.} }