@Article{, title={The possibility of using Polyethylene terephthalate (PET) as a fibre to improve the ductile behaviour of concrete أمكانية استخدام البولي اثلين تيرفثاليت (PET) كألياف لتحسين المطيلية للخرسانة}, author={Hamid Hamood Hussein حامد حمود حسين and Osama Abd Al-Ameer أسامة عبدالامير and Mahmoud Khaled Ahmed محمود خالد احمد}, journal={Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية}, volume={12}, number={2}, pages={30-39}, year={2018}, abstract={To preserve the natural materials, applying the principles of sustainable engineering, to approach the principle of zero waste and to contribute the solution of the negative environmental impact of two decades, which is caused by excessive use of bottles of polyethylene terephthalate (PET) in packaging, has led to the approach of alternative, clean and innovative technologies aimed at recycling and reuse to address this environmental problem. Proposed re-use empty bottles as a way to get rid of them and benefit from them at the same time the way, this method through which the empty bottles cutting into fibres using these fibres made of PET to improve the properties of concrete. Percentage of fiber that has been used are 1%, 1.5%, 2%, 3%, 4%, and 5%. Suitable tests were performed to measure properties of concrete reinforcement by recycle PET fibre such as compressive strength, splitting tensile strength, four-point bending strength, modulus of elasticity and toughness index. Flexural toughness tests were performed to measure the ductility capacities of reinforced concrete members with recycled PET fibre reinforced concrete. The results obtained indicate Toughness index was enhanced by using PET fibre reinforced concrete specimens, compared to no ductility performance of concrete specimens without fibre reinforcement. A significant change in ductility was when observed PET used fibre with 3%.

للحفاظ على المواد الطبيعية، تطبيق مبادئ الهندسة المستدامة، الاقتراب من مبدأ الصفر فضلات والمساهمة في حل الأثر البيئي السلبي لعقدين من الزمن الذي يسببه الاستخدام المفرط لقناني البولي أثيلين تيريفثاليت PET)) في التعبئة والتغليف، أدت إلى ظهور الاهتمام بنهج البدائل والتكنولوجيا النظيفة والمبتكرة لدى الباحثين تهدف إلى إعادة التدوير وإعادة الاستخدام. لمعالجة هذه المشكلة البيئية. اقترحت طريقة إعادة استخدام القناني الفارغة كوسيلة للتخلص منها والاستفادة منها بنفس الوقت، هذه الطريقة تتم من خلالها تقطيع القناني الفارغة الى الياف تستخدم هذه الألياف المصنوعة من PET لتحسين خواص الخرسانة. النسب التي تم استخدامها هي 1%، 1.5%، 2%، 3%، 4% و5%. تم أجراء اختبارات مناسبة لقياس خواص الخرسانة المسلحة بواسطة الياف PET معادة التدوير مثل قوة الضغط، قوة الشد، قوة الانحناء، معامل المرونة ومؤشر المطيلية. تم اجراء اختبار المتانة لقياس ليونة الخرسانة المسلحة بألياف PET المعاد تدويرها. تشير النتائج التي تم الحصول عليها الى تعزيز مؤشر المطيلية للخرسانة المعززة بالألياف المعاد تدويرها مقارنة مع الخرسانة الخالية من الالياف. تم الحصول على اعلى مطيلية للخرسانة المعززة بالألياف بنسب مختلفة وخصوصا عند استخدام 3% كإضافة حجمية.} }