TY - JOUR ID - TI - Improving the sub-base materials at Al-Fao port in Basrah Governorate-South of Iraq by adding some synthetic polymers and cement. تحسين مادة الحصى الخابط في موقع ميناء الفاو الكبير- محافظة البصرة/جنوبي العراق بإضافة بعض البوليمرات المركبة والأسمنت. AU - F.S. Al-Maliki فاطمة سامي المالكي AU - R.A. Mahmood رائد عزيز محمود AU - M.A. Jabir محمد علي جابر PY - 2018 VL - 33 IS - 1 SP - 57 EP - 64 JO - Mesopotamian Journal of Marine Science مجلة وادي الرافدين لعلوم البحار SN - 20736428 27086097 AB - The improvement process by adding polymers and cement has been carried out to sub-base material used in the compaction processes, in order to observe their effects on the geotechnical properties of the sub-base such as compaction, unconfined compressive strength, shear strength, California bearing ratio and absorption ratio. It has been observed that there is a significant improvement in the geotechnical properties of the soil as the value of the maximum dry density increased from 2.144 to 2.220 g/cm3, while the value of the optimum moisture contents decreased from 6.3 to 5.2% with a percentage of 5 % of the first polymer (Polyvinyl Acetate & Polyol). It is also revealed that there is an increase in the value of the unconfined compressive strength after adding 5% of the first polymer and 5% cement to the sub-base sample, and then soaked in water for different periods of time, the result was 11550 kPa with a soaking period of 28 days. Also, the angle of the internal friction values increased in testing the direct shear strength from 35◦ to 45◦ by adding 5% of the first polymer, and cohesion occurrence among the particles of the material under the action of the polymer as a adhesive material, the value reached 200 kN/m2. The California bearing ratio increased from 49% to 64% by adding 5% of the first polymer, while the absorption ratio decreased considerably at the same ratio and material from 9.8% to 4.1%.

اجريت عملية التحسين على مادة الحصى الخابط المستعملة في أعمال الحدل لملاحظة مدى تأثر الخواص الجيوتكنيكية للمادة كالرص ومقاومة الانضغاط غير المحصور ومقاومة القص ونسبة التحمل الكاليفورني ونسبة الامتصاص بعملية التحسين بالبوليمر والأسمنت. لوحظ تطور كبير في اغلب الخصائص الهندسية, اذ ارتفعت قيمة الكثافة الجافة العظمى من 2.144 غم/سم3 الى 2.220 غم/سم3 بينما أنخفضت قيمة المحتوى الرطوبي الأمثل من 6.3 % الى 5.2 % مع نسبة 5 % من البوليمر الأول. لوحظت زيادة عالية في قيم مقاومة الانضغاط غير المحصور بعد إضافة 5 % من البوليمر الأول و 5 % من الأسمنت الى إنموذج الحصى الخابط وغمره بالمياه لفترات زمنية مختلفة، إذ بلغت 11550 كيلو باسكال مع فترة غمر 28يوماً. كما ارتفعت قيم زاوية الاحتكاك الداخلي في فحص مقاومة القص المباشر من 35◦ الى 45◦ بإضافة 5 % من البوليمر الأول وظهور التماسك بين حبيبات المادة بفعل عمل البوليمر كمادة رابطة وبلغت قيمته 200 كيلو نيوتن/م2. أما قيم نسبة التحمل الكاليفورني فقد أرتفعت من 49 % الى 64 % مع اضافة% 5 من البوليمر الأول, كما أنخفضت نسبة الامتصاص بصورة ملحوظة مع نفس النسبة والمادة من 9.8 % الى 4.1%. ER -