@Article{, title={Optimizing the Parameters of Hot-wire CNC Machine to Enhance the Cutting of Plastic Foam إيجاد المثالية لمتغيرات عملية القطع بالسلك الحراري لتحسين خواص فوم البولسترين}, author={Israa Q. Mohammed اسراء قاسم محمد and Ali H. Kadhum علي حسين كاظم}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={15}, number={3}, pages={29 -37}, year={2019}, abstract={Hot-wire cutting is one of the important, non-traditional thermomechanical way to cut polymer, usually expanded foam and extruded foam, in low volume manufacturing. The study and analysis of Hot-Wire cutting parameters play an important role to enhance the quality and accuracy of the process and products. The effects on the surface have been investigated by using experimental tests designed according to the Taguchi orthogonal array (OA). In this study, four parameters with five levels for each parameter have been used: [temperature of wire (A) (100, 120, 130, 150, 160) °C], [diameter of wire (B) (0.3,0.4,0.5,0.7,0.8) mm], [velocity of cutting (C) (200, 300,400,500,600) mm/min], [and density of foam (D) (0.01,0.027,0.029,0.032,0.037) g/cm3]. Statistical software (MINITAB17) used to find the optimum conditions, which they are in Material Removal: 100 ˚C, 0.5 mm, 300mm/min, 0.032 g/cm3.

القطع بالسلك الكهربائي هو احدى الطرائق غير التقليدية الميكانيكية الحرارية لقطع البوليمر عادة اما الفوم التمددي او الفوم الانبثاقي في الإنتاج ذو الحجم القليل. الدراسة والتحليل لعوامل القطع بالسلك الحراري تؤدي الدور المهم في تحسين جودة العملية ودقتها للمنتوجات. التأثيرات على السطح تم ايجادها باستخدام تصميم التجارب العملية طبقا الى مصفوفة تا كوشي. في هذه الدراسة تم استخدام أربعة متغيرات مع خمسة مستويات لكل متغير (حرارة السلك °C 100،120،130،150،160( و(قطرالسلك mm 0.3,0.4,0.5,0.7,0.8) و(سرعه القطعmm/min 200 300 400 500 600 ) و(كثافة(0.01,0.027,0.029,0.032,0.037g/cm3 وتم استخدام برنامج MINITAB 17 لايجاد المثالية لظروف القطع وكانت نتيجتها على وفق النحو الاتي:100˚C, 0.5 mm, 300mm/min, 0.032 g/cm3 : MR وكذلك نسبه تأثير كل عامل على العملية تم ايجادها.} }