TY - JOUR ID - TI - Treatment of Waste Generator Oils by Using Various Methods معالجة زيوت المولدات المستهلكة باستخدام طرائق متنوعة AU - Muna Mahmood Khudhair منى محمود خضير AU - Kafaa Fadhil Abas كفاء فاضل عباس AU - Taghreed Mahdi Hameed تغريد مهدي حميد PY - 2015 VL - 6 IS - 2 SP - 76 EP - 85 JO - Iraqi Journal of Science and Technology المجلة العراقية للعلوم والتكنولوجيا SN - 18136893 29584604 AB - In general, lubricating oils consist base oil and chemical additives, which are working to prolong the time of use, improve the performance of oil in severe conditions, and keep the machine clean. These oils lose ability to lubricate during use because of exposure to internal and external pollutants, which requires replacement oil and disposal of used oil, which is one of the dangerous pollutants to the environment. The current research aims to purify and re-refine used lubricating oil using different processing methods, which include (vacuum distillation, acid / bentonite, distillation / bentonite, and acid/distillation treatments).Physical properties were studied for the treated oils, which include viscosity at 40 ºC, specific gravity at 20 ºC, flash point, pour point, and ash content in accordance with the American Standard Test Materials. Also chemical properties of the treated oils were studied which includes the total acid number and FTIR spectroscopy. The results showed that all treatment methods were worked to improve the physical properties of oils as compared with the used oils, but the best results were obtained using (acid/ bentonite) treatment method as compared with the specifications of the fresh oil. FTIR analysis of treated oils showed that different results in the removal of pollutants, which include carbon particles, water and organometallic compounds such as compounds of nitrogen, sulfur and oxygen, but it was found that (acid/ bentonite) treatment is the best method as compared with the spectrum of the fresh oil

تتكون زيوت التزييت بشكل عام من زيت اساس ومضافات كيمياوية تعمل على اطالة زمن الاستعمال وتحسين اداء الزيت بظروف قاسية وبقاء الماكنة أنظف.تفقد هذه الزيوت قدرتها على التزييت خلال الاستخدام نتيجة لتعرضها للملوثات الداخلية والخارجية مما يتطلب تبديلها بزيت جديد والتخلص من الزيت المستهلك الذي يعتبر من الملوثات الخطيرة للبيئة.يهدف البحث الحالي الى تنقية واعادة تصفية زيوت التزييت المستعملة باستعمال طرائق معالجة مختلفة والتي تشمل طريقة التقطير الفراغي وطريقة حامض / بنتونايت، وطريقة التقطير /بنتونايت، وطريقة الحامض / التقطير.تم دراسة الخواص الفيزياوية للزيوت المعالجة والتي تشمل اللزوجة بدرجة ٤٠ م ° والكثافة النوعية بدرجة ٢٠ م ° ونقطة الوميض ونقطة الانسكاب ومحتوى الرماد طبقا للمواصفات الامريكية القياسية على التوالي . و دراسة الخواص الكيمياوية للزيوت المعالجة والتي تشمل الرقم الحامضي الكلي وكذلك امتصاصية الاشعة تحت الحمراء بمقياس فورييه. لقد اظهرت نتائج البحث ان طرائق المعالجة المختلفة عملت على تحسين الخواص الفيزياوية للزيوت المعالجة بالمقارنة مع الزيوت المستعملة بنسب متفاوتة ولكن أفضل النتائج تم الحصول عليها باستعمال طريقة المعالجة (حامض/ بنتونايت) بالمقارنة مع المواصفات الفيزياوية للزيت الجديد.اظهرت امتصاصية الاشعة تحت الحمراء للزيوت المعالجة كفاءة متفاوتة في ازالة الملوثات والتي تشمل الدقائق الكاربونية والماء والمركبات العضوية الفلزية مثل مركبات النتروجين والكبريت والاوكسجين ولكن وجد ان طريقة المعالجة (حامض/بنتونايت) هي الافضل عند مقارنتها مع طيف الاشعة تحت الحمراء للزيت الجديد ER -