@Article{, title={Wear Behavior Performance of Polymeric Matrix Composites Using Taguchi Experiments أداء سلوك البلى للانسجة البوليمرية المركبة باستخدام تجارب تاكوجي}, author={Reem Alaa Mohammed ريم علاء محمد and Ruaa Haitham Abdul Raheem رؤى هيثم عبد الرحيم and Shaymaa Hasan Khazaal شيماء حسن خزعل}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={15}, number={4}, pages={33-44}, year={2019}, abstract={This research estimates the effect of independent factors like filler (3%, 6%, 9%, 11% weight fraction), normal load (5N, 10N, 15N), and time sliding (5,7 , 9 minutes) on wear behavior of unsaturated polyester resin reinforced with jute fiber and waste eggshell and, rice husk powder composites by utilizing a statistical approach. The specimens polymeric composite prepared from resin unsaturated polyester filled with (4% weight fraction) jute fiber, and (3%, 6%, 9%, 11% weight fraction) eggshell, and rice husk by utilizing (hand lay-up) molding. Dry sliding wear experiments were carried utilizing a standard (pin on disc test setup) following a well designed empirical schedule that depends on Taguchi’s experimental design L9 (MINITAB 16) with the determined (S/N) ratio and analysis of different (ANOVA) optimal factors to minimize the wear rate. Results exhibit that the presence the of 11% weight fraction eggshell and rice husk powder with 4% weight fraction jute fiber improves the wear resistance of unsaturated polyester composite materials significantly. The filler content was observed to be the major significant factor influencing the wear rate followed by time sliding and normal load. From the results of the S/N ratio, the optimization of wear parameters is obtained at specimens A3, A6, A7, and A10 as to minimize wear rate.

يقيم هذا البحث تأثير العوامل المستقلة مثل الحشو (3%، 6%، 9%، 11% كسر وزني) ، الحمل العادي (5N، 10N ، 15N) ووقت الانزلاق (5، 7، 9 دقائق) على سلوك البلى لمتراكبات راتنج البوليستر غير المشبع المدعم بألياف القنب ونفايات مسحوق قشور البيض وقشور التمن بوساطة استخدام نهج إحصائي. يتم تحضير العينات البوليمرية المتراكبة من راتنجات البوليستر غير المشبعة المحشوه مع 4 % كسر وزني ألياف القنب و (3٪ ، 6٪ ، 9٪ ، 11٪ كسراً وزنياً) قشور البيض وقشور التمن باستخدام القولبة اليدوية واجريت تجارب البلى الانزلاقي باستخدام (دبوس على إعداد اختبار القرص) القياسي باتباع جداول تجريبية مصممة جيدا تعتمد على تصاميم تجارب تاكوجي (L9) ( مني تاب 16) مع حساب نسبة الاشارة الى الضوضاء (S/N) وتحليل التباين (الانوفا) الامثل للمتغيرات لتقليل معدل البلى. أظهرت النتائج أن وجود 11 % كسراً وزنياً من مسحوق قشور البيض وقشور التمن مع 4 % كسراً وزنياً ليف القنب يحسن من مقاومة البلى للمواد المتراكبة من البوليستر غير المشبعة بشكل كبير. لوحظ أن محتوى الحشو هو العامل الرئيسي الهام الذي يؤثر على معدل البلى يليه (وقت الانزلاق) و (الحمل العادي). ايضا من نتائج نسبة الاشارة الى الضوضاء (S/N) تم الحصول على الأمثل لمتغيرات البلى عند العينات (A10, A7, A6, A3) لتقليل معدل البلى.} }