@Article{, title={Experimental Investigation of Thermal Performance of a Solar Chimney Provided with a Porous Absorber Plate دراسة تجريبية للأداء الحراري لمدخنة شمسية مزودة بسطح ماص مسامي}, author={Bashaeer A. Kareem Hamood بشائر عبد الكريم حمود and Mohammed A. Nima محمد عبد الرؤوف نعمة}, journal={Journal of Engineering مجلة الهندسة}, volume={26}, number={4}, pages={1-20}, year={2020}, abstract={Experimental investigation of the influence of inserting the metal foam to the solar chimney to induce natural ventilation are described and analyzed in this work. To carry out the experimental test, two identical solar chimneys (without insertion of metal foam and with insertion of metal foam) are designed and placed facing south with dimensions of length× width× air gap (2 m× 1 m× 0.2 m). Four incline angles are tested (20o,30o,45o,60o) for each chimney in Baghdad climate condition (33.3o latitude, 44.4o longitude) on October, November, December 2018. The solar chimney performance is investigated by experimentally recording absorber plate and air temperatures and velocity of air. Results indicated that the using metal foam absorber plate lead to reducing the mean temperature of absorber plate by 6.7 °C as a result, the values of chimney outlet air temperature increased. The daily solar chimney efficiency enhanced by 58.7% and the useful energy received also increased. The existence of metal foam caused higher air velocity at the exit and increasing in the ventilation rate that the maximum ventilate rate obtained from the solar chimney is 5.96 1/hr for 27 m3 volume of room at solar irradiance of 730 W/m2 for chimney incline angle of 60o. The results of the experimental work show that the addition of metal foam to the solar chimney as an absorber plate is an efficient method to enhance the characteristics of heat transfer and the thermal performance of the solar chimney in the weather condition of Iraq.

تم أجراء دراسة تجريبية في تأثير أدخال الرغوه المعدنية الى المدخنة الشمسية في أنتاج التهويه الطبيعية حيث وضحت وحللت في هذا البحث الحالي. لكي يتم تنفيذ التجربة, نوعين من المداخن الشمسية ( بدون أضافة رغوة معدنية و مع أضافة رغوة معدنية) صممت وتم تثبيتها مواجهه للجنوب بأبعاد طولx عرضx عمق فجوة الهواء (2مx 1مx 0.2). أربع زوايا ميلان مقدارها (60º, 45º, 30º, 20º) لكل مدخنة في ظل الظروف المناخية في بغداد ( خط العرض 33.3º , خط طول 44.4º) في شهر تشرين الاول وتشرين الثاني وكانون الاول من سنة 2019. أختبر أداء المدخنة الشمسية بواسطة تسجيل درجات حرارة الهواء و السطح الماص و سرعه الهواء عملياً.اظهرت النتائج أنه بأستخدام الرغوة المعدنية كسطح ماص يؤدي الى انخفاض في متوسط درجة حرارة الصفيحة الماصة للاشعاع االشمسي بمقدار 6.7 درجات مئوية ونتيجة لذلك، قيم درجات حرارة الهواء الخارج من المدخنة تزداد. الكفاءة الحرارية اليومية للمدخنة الشمسية ازدادت بنسبة 58.7% والطاقة المفيدة المحصلة ايضاً تزداد. أن وجود الرغوة المعدنية يسبب سرعة هواء اعلى عند منطقة الخروج و زيادة في معدل التهوية حيث اعلى معدل تهوية تم تحصيله من المدخنة الشمسية هو (5.69) 1/ساعة لحجمم غرفة 27م3 عند اشعاع شمسي مقداره 730 واط/م2 عند زاوية ميلان 60º. أظهرت النتائج العملية أن أدخال الرغوة المعدنية الى المدخنة الشمسية كسطح ماص طريقة فعالة لتحسين خصائص أنتقال الحرارة والأداء الحراري للمدخنة الشمسية في ظل الظروف المناخية في العراق.} }