@Article{, title={ANALYSIS THE WETTED AREA FOR SUBSURFACE DRIP IRRIGATION IN DIFFERENT SOILS TEXTURE تحليل المنطقة المبتلة باستعمال منقطة تحت السطحية في ترب مختلفة النسجة}, author={Z. K. Rasheed زينة كامل رشيد}, journal={Iraqi Journal of Agricultural Sciences مجلة العلوم الزراعية العراقية}, volume={51}, number={2}, pages={712-722}, year={2020}, abstract={Subsurface drip irrigation is one of the most efficient systems for management of water. This study is aimed to analysis the wetted area for subsurface drip irrigation system. Several models are developed for predicting the wetted widths and the wetted depths which are very important for designing an optimal irrigation system. HYDRUS/2D is used for predicting the dimensions of wetting patterns numerically by using the two dimensional transient flow of water from a subsurface drip irrigation through sandy loam and loamy sand soils. The wetting patterns from a subsurface drip source are simulated by using the system of United States Department of Agriculture, USDA, the wetting patterns are simulated at different values of applied heads, different diameters of drip, and different values of initial volumetric soil water contents which selected as initial conditions. In this work, greater spreading occurs in loamy sand than sandy loam in vertical and horizontal directions. Moreover, the results showed that the empirical formulas which can be used for estimating the wetting dimensions of wetted width and wetted depth in terms of initial volumetric soil water contents, applied heads, diameters of the drip and times of operation, are good with an average relative error not exceed 3%, so it can be used to assist the designers in irrigation field.

يعتبر الري بالمنقطات تحت السطحية أحد أكثر أنظمة إدارة المياه كفاءة. تهدف هذه الدراسة الى تحليل المنطقة المبتلة باستعمال نظام منقطة تحت السطحية. وقد تم تطوير العديد من النماذج للتنبؤ بالاعراض والأعماق المبتلة والتي تعد مهمة جدًا لتصميم نظام الري الأمثل. يستخدم هايدرس ذات البعد الثنائي للتنبؤ بأبعاد أنماط الترطيب عدديًا باستخدام التدفق العابر ثنائي الأبعاد للمياه من الري بالمنقطات تحت السطحية عبر الترب الرملية الطميية والطميية الرملية. تم محاكاة أنماط الترطيب من مصدر منقطة تحت السطحية باستخدام نظام وزارة الزراعة بالولايات المتحدة، وزارة الزراعة الأمريكية، وتم محاكاة أنماط الترطيب على قيم مختلفة من الضغوط المسلطة، وبأقطار مختلفة من المنقطات، وقيم مختلفة لمحتويات الرطوبة الحجمية للتربة والتي تم اختيارها كشروط أولية. في هذا العمل، يحدث انتشار أكبر في التربة الطميية الرملية أكثر من التربة الرملية الطمية وفي كلا الاتجاهين العمودي والافقي. علاوة على ذلك، أظهرت النتائج أن الصيغ التجريبية التي يمكن استخدامها لتقدير أبعاد التبلل للعرض المبلل والعمق المبلل من حيث محتويات ماء التربة الحجمية الأولية، والضغوط المسلطة، وأقطار المنقطة وأوقات التشغيل، جيدة مع نسبة معدل خطا لايتجاوز 3% لذا يمكن أن تستخدم لمساعدة المصممين في مجال الري.} }