TY - JOUR ID - TI - Acoustic and Thermal Insulation of Nanocomposites for Building Material العزل الصوتي والحراري لمتراكبه نانويه لمواد البناء AU - Shanaz Hussein Ahmad شاناز حسين احمد AU - Rana Mahdi Salih رنا مهدي صالح PY - 2020 VL - 17 IS - 2 SP - 494 EP - 501 JO - Baghdad Science Journal مجلة بغداد للعلوم SN - 20788665 24117986 AB - This work aims to enhance acoustic and thermal insulation properties for polymeric composite by adding nanoclay and rock wool as reinforcement materials with different rations. A polymer blend of (epoxy+ polyester) as matrix materials was used. The Hand lay-up technique was used to manufacture the castings. Epoxy and polyester were mixed at different weight ratios involving (50:50, 60:40, 70:30, 80:20, and 90:10) wt. % of (epoxy: polyester) wt. % respectively. Impact tests for optimum sample (OMR), caustic and thermal insulation tests were performed. Nano clay (Kaolinite) with ratios ( 5 and 7.5% ) wt.% , also hybrid reinforcement materials involving (Kaolite 5 & 7.5 % wt.% + 10% volume fraction of rockwool ) were added as reinforcement materials to the optimum sample. Results of impact test prove that the optimum sample has (80:20) wt. % of mixing ratio of (epoxy: polyester) wt. % for using as matrix materials. Moreover, the adding of nanoclay (Kaolinite) with ratio (7.5 wt.%) leads to the highest sound insulation. The sound intensity started at (99.8) db at 100 Hz, and reached to (101.3) db at 10000 Hz., which is much lower than the values obtained from the un-reinforced blend, of which the sound intensity started at (107.2) db and reached to (108.7) db., at the same range of frequencies. Thermal conductivity results show that the optimum matrix with (7.5 %) wt. % has the lowest value about (0.443 k.wm .c).

يهدف البحث الى تعزيز خصائص العزل الحراري والصوتي لمادة متراكبة بوليمرية، مصنعة من خليط من (الأيبوكسي+بولي استر) كمادة أساس ,ومدعمة بكلا من الصوف الصخري والاطيان النانويه. تم استعمال طريقه القولبه اليدويه لتصنيع المصبوبات، حيث تم خلط الأيبوكسي والبولي أستر بنسب مختلفة تبدأ من (50:50) % لتصل الى (100-90) للايبوكسي والبولي استر على التوالي. بالاعتماد على اختبار الصدمه للعينات التجريبيه تم اختيار افضل نسبة خلط وهي نسبة (80-20) للأيبوكسي والبولي أستر على التوالي حيث حصلت على اعلى مقاومة صدمة،وبناءا عليه تم أختيارها كمادة أساس. تم بعد ذلك تدعيم المادة الأساس بالأطيان النانوية (كاؤلايت) بكسر وزني (7.5- 5) % ، هذه العينات تم تصنيعها بصورة هجينة ايضا بعد اضافة الصوف الصخري بكسر حجمي (10) %. اوضحت نتائج اختبار العزل الصوتي ان الخليط المدعم بالأطيان النانوية بكسر وزني (7.5) % يمتلك اعلى قيمة للعزل الصوتي حيث كانت (99.8) db عند تردد 100 Hz وصلت إلى (101.3)db عند 10000Hz، وهو أقل بكثير من القيم التي تم الحصول عليها من العينات الغير مدعمه، والتي بدأت كثافة الصوت عند(107.2)db ووصلت إلى (108.7)db، في نفس النطاق من الترددات. تُظهر نتائج الموصلية الحرارية أن الخليط المثالي التي يحتوي على (7.5) %wt، يمتلك اقل قيمة للتوصيل الحراري التي هي (0.443)W/m.C° ER -