@Article{, title={Permeable Reactive Barrier of Coated Sand by Iron Oxide for Treatment of Groundwater Contaminated with Cadmium and Copper Ions الحاجز التفاعلي النفاذ المكون من رمال مطلية بأوكسيد الحديد لمعالجة المياه الجوفية الملوثة بأيونات الكادميوم والنحاس}, author={Mohammed B. Abdul-Kareem محمد بهجت عبد الكريم and Ayad A.H. Faisal اياد عبد الحمزة فيصل}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={16}, number={2}, pages={47-55}, year={2020}, abstract={In this research, coated sand iron-oxide (CSIO) has been used as a permeable reactive barrier (PRB) for removal of cadmium and copper ions from the contaminated groundwater. The prepared material has been manufactured by precipitation of nano-particles based this oxide type on the sand surfaces by impregnation process. Therefore, this technique can be considered the main objective of the present study. The description of sorption data for sorbate-sorbent under consideration by the Langmuir isotherm model was more valuable than the Freundlich model. The maximum adsorption capacity of CSIO reaches 1.9181 and 7.6425 mg/g for cadmium and copper respectively. COMSOL Multiphysics Version release 3.5 has a good ability in the simulation and prediction of the cadmium and copper transport through one-dimensional CSIO-PRB. The outcome of this investigation prove that the manufactured CSIO has significant capability in the delay of contaminants the migration through barrier packed with this material. The root means squared errors between predicted and measured data were not exceeded the 0.121; so, this means that there a good agreement between these data.

ان تصنيع رمال مطلية بأوكسيد الحديد من خلال ترسيب الجزيئات النانوية لذلك الاوكسيد على سطوح الرمال واستخدامها في الحاجز التفاعلي النفاذ لإزالة ايونات الكادميوم والنحاس من المياه الجوفية الملوثة الهدف الرئيسي للدراسة الحالية. تم توصيف بيانات الامتزاز نتيجة تفاعل المادة المازة مع المادة الممتزة قيد الدراسة بشكل جيد من خلال نموذج لانكمير والذي كان أفضل من نموذج فراندلش. لقد وجد ان اعلى قيم لقابلية الامتزاز باستخدام الرمال المطلية بأوكسيد الحديد وصلت الى 1.9181 و7.6425 ملغم/غم لكل من الكادميوم والنحاس على التوالي. اثبت برنامج COMSOL Multiphysics 3.5a قدرته على محاكاة والتنبؤ بانتقال الكادميوم والنحاس من خلال حاجز تفاعلي نفاذ ذو البعد الواحد والمكون من رمال مطلية بأوكسيد الحديد. أثبتت النتائج ان المادة المصنعة المستخدمة ضمن هذا الحاجز لها القدرة على تأخير انتقال الملوثات. لوحظ ان جذر معدل مجموع الأخطاء بين النتائج المتوقعة والمقاسة لا يتجاوز 0.121 وهذا يعني وجود توافق جيد بين تلك البيانات.} }