@Article{, title={Ablation characteristics of carbon nanotubes reinforced novolacresin nanocomposites: Experimental and simulation approach تعزيز خصائص الاجتثاث من أنابيب الكربون النانوية نانومتري الراتنج novolac: التجريبية ومحاكاة نهج}, author={Bahjat B. Kadhim بهجت كاظم}, journal={Academic Science Journal مجلة العلوم الاكاديمية}, volume={7}, number={3}, pages={59-70}, year={2011}, abstract={Ablation rate and thermal conductivity for phenol- formaldehyde type novolac resin
reinforced with single walled carbon nanotubes (SWCNTs) have been studied via
experimental and simulation of Oxy – acetylene flame and Lee’s disc techniques respectively.
Simulation programs of heat transfer in three dimensions of ablative test for novolac and
novolac nanocomposites specimens were carried out using finite difference method (FDM).
Theoretical thermal conductivity was calculated according to microstructures model. Hotpress
technique was used to prepare the nanocomposites as well as novolac specimens using
flash molds at standard conditions. Thermal conductivity results show, that the values
increase progressively by succession of volume fraction of SWCNTs. Ablation rate behaves
inversely, where it drops at high volume fraction of SWCNTs. The thermal conductivity –
ablation rate relationship, displays two mechanisms, the first, associated with the starting of
ablation test, is recognized by ideal distribution of SWCNTs, which leads to good thermal
dispersion due to the formation of segregated network of thermal conducting paths. The
second mechanism is associated with in- run ablation test recognized by shearing cracks
appearance, which leads to earlier char production mechanism. Simulation thermal
conductivity results, , and when it compared with the experimental results, it observed, that
the experimental results, were located between the parallel and random direction simulation
values of SWCNTs, which is evidenced that the additives arrangement closed to parallel
direction more than random or perpendicular direction with respect to heat flux direction.
Keywords: Ablation, simulation, nanocomposites, and carbon nanotubes.

وقد تم دراسة معدل التذرية، والتوصيل الحراري للالفينول، الفورمالدهايد نوع الراتنج novolac عززت مع احد الجدران أنابيب الكربون النانوية (SWCNTs) عبر التجريبية ومحاكاة من أوكسي - لهب الاسيتيلين وتقنيات القرص لي على التوالي. ونفذت برامج المحاكاة لنقل الحرارة في ثلاثة أبعاد للاختبار الجر لnovolac والعينات novolac نانومتري خارج باستخدام طريقة الفروق المنتهية (FDM). تم حساب الموصلية الحرارية النظرية وفقا لنموذج المجهرية. وقد استخدم الساخنة الصحافة تقنية لإعداد نانومتري فضلا عن عينات novolac باستخدام قوالب فلاش في الظروف القياسية. نتائج التوصيل الحراري تظهر، أن القيم زيادة تدريجيا من قبل الخلافة من جزء من حجم SWCNTs. معدل الاجتثاث يتصرف عكسيا، حيث يسقط في جزء ارتفاع حجم SWCNTs. والموصلية الحرارية - الاجتثاث علاقة معدل، يعرض آليتين، الأولى، المرتبطة إلى البدء في اختبار الاجتثاث، معترف بها من قبل التوزيع الأمثل للSWCNTs، الأمر الذي يؤدي إلى تشتت حرارية جيدة نظرا لتشكيل شبكة عازلة من المسارات الحرارية إجراء. ويرتبط أما الآلية الثانية مع اختبار الاجتثاث في الأمد معترف بها من قبل قص الشقوق مظهر، الأمر الذي يؤدي إلى آلية الإنتاج في وقت سابق شار. نتائج المحاكاة التوصيل الحراري،،، ولاحظ أنه عندما بالمقارنة مع النتائج التجريبية، التي كانت موجودة على النتائج التجريبية، وبين القيم اتجاه المحاكاة المتوازية وعشوائية من SWCNTs، والذي يدل على أن الترتيب المضافة مغلقة موازية لاتجاه أكثر من عشوائية أو الاتجاه العمودي بالنسبة لتسخين اتجاه التدفق.} }